Crestron SWAMP(I)-24X8 Spezifikationen PDF herunterladen (Seite 22)

Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8

Setup

Network Wiring

When wiring the Cresnet network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results or damage

to the equipment. Please use the Crestron Power Calculator to help calculate

how much power is needed for the system (

www.crestron.com/calculators).

For networks with 20 or more devices, use a Cresnet Hub/Repeater (CNXHUB) to

maintain signal quality.

NOTE: If using Cresnet for communications between the SWAMP-24x8 and a

control system, only one SWAMPE Multiroom Audio Expander or one S-EXT1-S

Sonnex Link Over Fiber Extender (connected to a SWAMPE Multiroom Audio

Expander) can be connected.

For more details, refer to “Check Network Wiring” on page 48.

The SWAMP-24X8 can also use high-speed Ethernet for communications between

the device and a control system, computer, digital media server and other IP-based

devices.

For information on connecting Ethernet devices in a Crestron system, refer to the

latest version of the Crestron e-Control

Reference Guide (Doc. 6052), which is

available from the Crestron Web site (

www.crestron.com/manuals).

Sonnex Link Wiring

Crestron recommends using Crestron DM-CBL-8G or high-quality CAT5e shielded

twisted-pair cable for Sonnex Link connections between the SWAMP-24X8 and

each peripheral.

NOTE: Shielded connectors such as the DM-8G-CONN must be used.

DM-CBL-8G wire can carry Sonnex Link signals up to 200 feet (61 meters).

Identity Code

Net ID

The Net ID of the SWAMP-24X8 has been factory set to A1. The Net IDs of

multiple SWAMP-24X8 devices in the same system must be unique. Net IDs are

changed from the front panel or from a personal computer (PC) via Crestron Toolbox

(refer to “Establishing Communication” on page 44).

When setting the Net ID, consider the following:

• The Net ID of each unit must match an ID code specified in the SIMPL

Windows program.

16 • Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations & Installation Guide – DOC. 7049B

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Keine Kommentare

Crestron SWAMP(I)-24X8 Spezifikationen Seite 22