Crestron SWAMP(I)-24X8 Spezifikationen PDF herunterladen (Seite 32)

Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8

3. Press ENTER to select Compensation and display the list of sources.

Press the T or ▲ buttons to scroll through the sources until the input

source to be adjusted is displayed.

Press ENTER to select the input source and display the gain control.

Gain Control

Press the T or ▲ buttons to display the amount of gain to be applied and

press ENTER. The display returns to the list of input sources.

Repeat steps 4 through 6 for each input source.

Press MENU twice to return to the “Installer Mode” menu.

Zone Setup

Select this option to adjust the following parameters for each zone:

• EQ (Equalization): Choose from six preset equalization settings.

•

Bass: Adjust the bass level to the desired preference.

• Treble: Adjust the treble level to the desired preference.

•

Loudness: Apply loudness compensation to any signal routed to a zone.

•

Balance: Adjust the balance to the desired preference.

• Mono: Set the zone for mono or stereo sound.

•

Minimum Volume: Set the lowest volume setting to which the zone can be

set.

•

Maximum Volume: Set the highest volume setting to which the zone can

be set.

•

Startup Volume: Set the volume level that is used when a zone is turned

on.

•

Bussing: Assigns the selected zone to a group of zones (bus). Zones in a

bus track each others’ volume and source. (i.e. when the source or volume

for one zone in the bus is adjusted, the other zones in that bus follow).

•

Bus Volume Offset: Specifies a volume offset between -12 to +12 dB that

is applied on top of the volume setting for the selected zone when it is a

member of a bus. Since zone volumes track in a bus this ensures the

selected zone is always at the specified level above/below the other zones in

the bus.

•

Bussing Lists: View the zones that are currently members of a bus.

•

Bridging: Selects output zones to be bridged.

•

Wattage: Specify the wattage rating for a speaker that is connected to a

selected zone. This value is used by the Speaker Protect algorithm. When

enabled, the Speaker Protect function prevents the delivered power from

exceeding the speaker’s power rating.

26 • Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations & Installation Guide – DOC. 7049B

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron SWAMP(I)-24X8 Spezifikationen Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Crestron SWAMP(I)-24X8