Crestron Lighting Design Installationsanleitung PDF herunterladen (Seite 29)

230 V Lighting Design Guide

Doc. 4859C | crestron.com

CAEN-BLOCK Location and Orientation in a Double-Wide Enclosure

Two and Four Channel Inductor Modules

The CLXI-2IND is a 2-inductor terminal block and module kit. The CLXI-4IND is a 4-inductor terminal block and

module kit. Inductor modules reduce hum from incandescent lamps that are connected to dimmer modules in

a Crestron lighting system. These kits are mounted in any Crestron Automation Enclosure (CAEN-Series and

CAENIB-Series Enclosures). The terminal block connects wires into and out of the inductor module. The inductor is

wired in series between the output of the dimmer module and the load. The maximum load for any inductor in the

module is 16 amps. Each terminal block and module kit is considered a single entity and must be used together.

The terminal blocks (CLTI-2IND, CLTIBN-2IND, CLTI-4IND, and CLTIBN-4IND) are shipped separately from their

respective modules (CLXI-2IND and CLXI-4IND) to permit termination of the ﬁeld wiring to the terminal block prior to

installation of the module.

CLXI-2IND and CLXI-4IND

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 81 82

Keine Kommentare

Crestron Lighting Design Installationsanleitung Seite 29