Crestron Lighting Design Installationsanleitung PDF herunterladen (Seite 21)

230 V Lighting Design Guide

Doc. 4859C | crestron.com

CLTIBN Terminal Block Installation

CAUTION:

• RISK OF ELECTRIC SHOCK—MORE THAN ONE DISCONNECT SWITCH MAY BE REQUIRED TO DE-ENERGIZE

THE EQUIPMENT BEFORE SERVICING.

• This equipment is for indoor use only and needs to be air-cooled. Mount in a well-ventilated area. The

ambient temperature must be 0° C to 40° C. The relative humidity must be 0% to 90% (non-condensing).

Terminal blocks are installed along the left side of single-wide enclosures and along the outside edges (left and

right sides) of double-wide enclosures. Modules are installed along the right side of single-wide enclosures and

side-by-side in the center of double-wide enclosures. When installing modules and terminal blocks in a

double-wide enclosure, be sure to invert units on the right side so that they can be properly wired.

NOTES:

• A licensed electrician, in accordance with all national and local codes, must mount terminal blocks and

modules in a Crestron Automation Enclosure.

• To ensure proper ﬁt, terminal blocks and modules must be installed as indicated in the CAENIB Installation

Guide (Doc. 6562) on the Crestron website.

• Modules and terminal blocks must be installed into the lowest available spaces and continue toward the

top of the enclosure.

• Both left side and right side adhesive wiring labels are provided. The left-side labels are used in both

single and double-wide enclosures. The right-side labels are only used in double-wide enclosures.

• CLTI-4IND and CLTI-2IND terminal blocks should be installed at the top of a CAENIB enclosure and grouped

with other CLTI-4IND and CLTI-2IND terminal blocks.

• Use copper conductors only—rated 75° C.

• LINE and NEUTRAL lines can be jumped to other terminal blocks in the enclosure.

CLTIBN-1DELV4 (Left Side Unit) CLTIBN-1DELV4 (Right Side Unit)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 81 82

Keine Kommentare

Crestron Lighting Design Installationsanleitung Seite 21