Crestron TPS-MEM16MB Installationsanleitung PDF herunterladen (Seite 10)

Flash Memory Crestron TPS-MEM16MB & TPS-MEM32MB

6 •• Flash Memory for TPS User Interfaces: TPS-MEM16MB & TPS-MEM32MB Installation Guide - DOC. 5927

10. As shown below, locate the memory socket.

Memory Socket Location

LOCATION

OF MEMORY

SOCKET WITH

MEMORY

MODULE

NOTE

POLARITY

OF MEMORY

MODULE

(NOTCH IN

CORNER OF

BOARD)

SIDE CLIP (ONE

AT EACH END)

11. Press the two metallic side clips of the socket securing the

original module in opposing directions and notice that the

module lifts up slightly.

12. Use even pressure while backing out the original module out

of the socket.

13. Observe polarity (as shown in the previous illustration) and

insert the new memory module into the socket at a slight

angle.

14. Apply even pressure to the module and level it off, parallel to

the motherboard. The two metallic side clips snap into place

as it becomes seated.

15. If removed, return the TPS-VID expansion card.

16. Position the touchpanel base cover onto the base.

17. Hold the touchpanel base cover in place and position the

touchpanel facedown onto a padded surface to prevent

scratching of the screen.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Crestron TPS-MEM16MB Installationsanleitung Seite 10