Crestron QM-MD8x8 Spezifikationen PDF herunterladen (Seite 29)

Crestron QM-MD8x8 QuickMedia Distribution System

Communication Settings

NOTE: For laptops and other PCs without a built-in RS-232 port, Crestron

recommends the use of PCMCIA cards, rather than USB-to-serial adapters. If a

USB-to-serial adapter must be used, Crestron has tested the following devices with

good results:

Belkin (large model) F5U103

I/O Gear GUC232A

Keyspan USA-19QW (Discontinued)

Results may vary depending on the computer being used. Other models, even from

the same manufacturer, may not yield the same results.

The procedure in this section provides details for RS-232 communication between

the PC and the control system. If TCP/IP communication is preferred, consult the

latest version of the Crestron e-Control Reference Guide (Doc. 6052) or the

respective Operations Guide for the control system. These documents are available

from the Downloads | Product Manuals section of the Crestron website

(www.crestron.com). Refer to the figure on the next page for a typical connection

diagram when uploading files.

NOTE: When connecting a PC to the QM-RMCRX, use a standard DB9 female-to-

female “null modem” cable. To connect to other control systems refer to the

Operations Guide included with the control system.

Typical Connection Diagram when Uploading

1. Open the Crestron Viewport.

Either launch the stand-alone version of Viewport or start SIMPL

Windows and from the menu bar, select Tools | Viewport.

2. Refer to the following figure after this step. From the Viewport menu,

select Setup | Communications settings (alternatively, press Alt+D)

to open the “Port Settings” window.

Operations Guide - DOC. 6260 QuickMedia Distribution System: QM-MD8x8 • 25

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

Keine Kommentare

Crestron QM-MD8x8 Spezifikationen Seite 29