Crestron C2N-FT-TPS4-U Installationsanleitung PDF herunterladen (Seite 30)

FlipTop Touchpanel Control Center Crestron C2N-FT-TPS4/TPS4-U

Firmware Upgrade

To take advantage of all the C2N-FT-TPS4/TPS4-U features, it is important that

the unit contains the latest firmware available. Please check the Crestron website

for the latest version of firmware. Not every product has a firmware upgrade,

but as Crestron improves functions, adds new features, and extends the

capabilities of its products, firmware upgrades are posted.

Typically, upgrade files are downloaded as .zip files. With Toolbox, it is not

necessary to extract the files before uploading; Toolbox will automatically

extract the file(s) for you.

To upgrade the firmware, complete the following steps.

NOTE: A firmware upgrade file for the TPS4 touchpanel has the extension .csf. The

following is a typical firmware upgrade file name for the C2N-FT-TPS4.

tps-4_qm-ftcc-tps_tps-4_c2n-ft-tps-4_2.007.0161.csf

1. Make sure that “Communication Settings,” which begins on page 22, has

been performed.

2. Open Crestron Toolbox.

3. Open the Network Device Tree (the firmware upgrade function is also

available in the SMW Program Tree window).

4. Click on the ‘+’ next to the device name to display the Net ID, then right-

click on the Net ID and select Functions | Firmware. (Refer to the

following illustration.)

Network Device Tree Window – Right-Click Sub Menu

5. The “Firmware” window displays the model and current firmware version

as shown in the following graphic.

26 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U Operations & Installation Guide - DOC. 6398

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Crestron C2N-FT-TPS4-U Installationsanleitung Seite 30