Crestron C2N-FT-TPS4-U Installationsanleitung PDF herunterladen (Seite 14)

FlipTop Touchpanel Control Center Crestron C2N-FT-TPS4/TPS4-U

Duplicate Net ID Warning Message

This method does not change the Net ID as assigned in SIMPL windows. Refer to

page 20 for the SIMPL Windows ID change procedure.

NOTE: You may also use SystemBuilder to perform Network ID setup.

1. Ensure that all network devices are connected to the control system.

2. Open Crestron Toolbox and establish communications (refer to page 22).

3. Select the Network Device Tree

icon, or select Tools | Network

Device Tree. (Refer to the following figure.)

Network Device Tree

4. Click on the ‘+’ next to the name of the device to display its current Net ID

setting, and then right-click on the Net ID you wish to change. When the

sub-menu appears, select Change Network ID from the sub-menu.

Network Device Tree – Sub-Menu

5. The current Net ID is highlighted. Enter a new Net ID and press Enter.

Enter New Net ID

10 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U Operations & Installation Guide - DOC. 6398

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Keine Kommentare

Crestron C2N-FT-TPS4-U Installationsanleitung Seite 14