Crestron C2N-FT-TPS4-U Installationsanleitung PDF herunterladen (Seite 16)

FlipTop Touchpanel Control Center Crestron C2N-FT-TPS4/TPS4-U

Parts Supplied for the Optional Cable Management Plate

PART DESCRIPTION QUANTITY

Small Cable Bushing, 5/16 inch ID, 0.5 inch OD 4

Medium Cable Bushing, 0.39 inch ID, 0.64 inch OD 2

Large cable Bushing, 0.55 inch ID, 0.80 inch OD 2

Cable Support Plate 1

Screws, 4-40 x ¼ , black, Phillips head 4

The only tool required for installation of the cable support plate is a Phillips

screwdriver.

The cable support plate must be installed before mounting the TPS4 to a surface. The

cables are looped through the cable support plate.

1. Place the bushings on the cables (eight bushings supplied). Use the large

bushing for the VGA cable.

2. Thread the cables through the appropriate slot on the plate.

3. Snap the bushings into the plate slots.

4. Feed all the excess cable through the opening.

5. Attach the plate using the four 4-40 x ¼ screws supplied.

Cable Management Plate Installation

(4) #4 x 1/4 LG Black Screws

Bushings

Cable Support Plate

Mounting to Surface

The TPS4 is designed to mount in a horizontal surface, such as a desk top, lectern, or

podium. The following diagram illustrates the required opening size to accommodate

the TPS4. A cutout template (4007478) is included.

12 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U Operations & Installation Guide - DOC. 6398

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Keine Kommentare

Crestron C2N-FT-TPS4-U Installationsanleitung Seite 16