Crestron ATC-AUDIONET Installationsanleitung Seite 34

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 33
Internet Radio Tuner Card Crestron ATC-AUDIONET
2. Turn the selection knob to display the desired IP ID and press the ENTER
button to select it. The display returns to the previous screen. To cancel the
operation and return to the previous screen, press MENU.
Set Control System IP
Address
The IP address of the master control system must be specified. To specify an IP
address:
1. Turn the selection knob to highlight Control System IP Address and press
the ENTER button. The IP address controls are displayed.
“Edit Control System IP Address” Controls
Edit Ctrl Sys IP Address
Use Softbutton to select.
The use Knob to edit.
Press ENTER to accept.
[172] 036. 021.
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
056
2. Turn the selection knob to set the first octet of the IP address.
3. Press the soft button under the next octet (or press the ENTER button to
move to the next octet) to select it for editing.
4. Repeat steps 2 and 3 for each octet.
5. To save the IP address, move the cursor to the right-most octet and press the
ENTER button. To cancel the operation and return to the previous screen,
press MENU.
View MAC Address
To view the ATC-AUDIONET’s MAC address:
1. Turn the selection knob to highlight MAC Address and press the ENTER
button. The MAC address is displayed.
2. Press MENU to return to the previous screen.
Operation
This section contains instructions for using the AES/AMS/AMS-AIP front panel to
control an ATC-AUDIONET.
For more information about configuring the AES, AMS, or AMS-AIP, refer to the
respective Operations Guide.
NOTE: To ensure proper operation, download and install the latest AES, AMS, or
AMS-AIP firmware from http://crestron.com/firmware.
Select the ATC-AUDIONET
To select the Internet radio tuner:
1. Press SOURCE and turn the selection knob until an Internet radio tuner is
displayed.
2. Press the ENTER button to select the tuner. If the tuner is already in use, its
controls are displayed. Otherwise, press the soft button labeled Control.
30 Internet Radio Tuner Card: ATC-AUDIONET Operations & Installation Guide – DOC. 6933A
Seitenansicht 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare