Crestron ATC-AUDIONET Installationsanleitung PDF herunterladen (Seite 29)

Crestron ATC-AUDIONET Internet Radio Tuner Card

Appendix

This appendix contains instructions for using a host device’s front panel controls to

configure and operate an ATC-AUDIONET.

The ATC-AUDIONET is compatible with the following host devices:

• AES Adagio Entertainment System

• AMS Adagio Media System

• AMS-AIP Adagio Media System with Advanced Image Processing

• CEN-TRACK

CEN-TRACK

For instructions on using a CEN-TRACK to configure and control an

ATC-AUDIONET, refer to the latest version of the CEN-TRACK Operations Guide

(Doc. 6646) which is available for download from the Crestron Web site.

AES/AMS/AMS-AIP

The AES, AMS, and AMS-AIP support an ATC-AUDIONET when loaded with a

SystemBuilder-created program that contains an ATC-AUDIONET.

For more information about configuring the AES, AMS, or AMS-AIP, refer to the

respective Operations Guide.

NOTE: This section assumes an ATC-AUDIONET is installed in the AES, AMS,

or AMS-AIP. Additionally, this section assumes that a program containing an

ATC-AUDIONET was created and loaded on to the AES, AMS, or AMS-AIP.

NOTE: The AES, AMS, and AMS-AIP use the same procedures for configuring

and operating an ATC-AUDIONET.

Configuration

The ATC-AUDIONET is configured using the Installer Tools function that is built in

to the AES, AMS and AMS-AIP.

NOTE: Many of these options are already configured by the SystemBuilder-created

program.

To use Installer Tools to configure the ATC-AUDIONET:

1. Press and hold the ROOM and SOURCE buttons for 10 seconds to open

the Installer Tools menu.

Operations & Installation Guide – DOC. 6933A Internet Radio Tuner Card: ATC-AUDIONET • 25

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Keine Kommentare

Crestron ATC-AUDIONET Installationsanleitung Seite 29