
DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
5
LAN
4
GREEN
LED
AMBER
LED
PIN 8
PIN 1
(1) 8-pin RJ-45 female, shielded, with two
LED indicators;
10BASE-T/100BASE-TX Ethernet port,
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RX -
3 RX + 7 N/C
4 N/C 8 N/C
6
(1) 6-32 screw, chassis ground lug
7
DM IN MMF/SC
(1) SC female optical fiber connector;
DM 8G Fiber input;
Connects to DM 8G Fiber output of a DM
switcher, transmitter, or other DM device via
CresFiber 8G fiber optic cable
5
8 DM IN LED (1) Green LED, indicates DM link status
9 RESET
(1) Miniature recessed push button for
hardware reset
10
SETUP
(Button and LED)
(1) Miniature recessed push button for
Ethernet setup and (1) red LED
11
24 V
0.75A MAX
(1) 2.1 mm barrel DC power jack;
24 Volt DC power input;
power pack included
12 Power LED
(1) Green LED, indicates operating power
supplied from local power pack
1. Interface connectors for the COM and IR ports are provided with the unit.
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI
interface cable sold separately.
3. Maximum string length for serial commands sent via the IR port should be no greater than
40 characters.
4. To determine which is pin 1 on the cable, hold the cable so that the end of the eight pin modular plug
is facing away from you, with the clip down and copper side up. Pin 1 is on the far left.
5. All cable sold separately. The maximum DigitalMedia 8G Fiber cable length is 1000 feet
(~300 meters) using CRESFIBER8G fiber optic cable, or 500 feet (~150 meters) using standard
CRESFIBER, CRESFIBER-SINGLE-SC, or generic OM3 simplex multimode fiber optic cable.
Refer to the latest version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete
wiring guidelines. It is available from the Crestron Web site at
www.crestron.com/dmresources.
10 • DigitalMedia 8G™ Fiber Receiver 100: DM-RMC-100-S Operations & Installation Guide – DOC. 7067B
Kommentare zu diesen Handbüchern