Crestron PRO2 Bedienungsanleitung PDF herunterladen (Seite 5)

SYMETRIX SOLUTIONS: TECH TIP

February 2014

6408 216th Street SW | Mountlake Terrace, WA 98043 USA

T +1.425.778.7728 F +1.425.778.7727 | www.symetrix.co

The main parts of the program are:

• The SymNet ATI Simple Dialer v1.1 is the custom user module

described in this tech-tip to control the Radius AEC and ATI card.

• The Preset example shows how a preset may be executed. This code

is not used in this application.

• The Com section is there for applications where serial (RS-232)

communication is used instead of network (UDP) Control. This section

is commented out in the current project. When using serial control

instead of network control, it is necessary to conﬁgure the serial port

on the “Conﬁgure” screen in Simpl and uncomment this Com section.

Network (UDP) control is recommended.

• The Global System Initialization section is used to start the program.

SymNet-Simple-Telco-Example.smw

While the simple dialer module supports one phone line, it would be possible

to have two of these modules in the Crestron Simpl program to control both

analog telephony interfaces on an ATI card. The second phone line would

require unique controller numbers and be conﬁgured as the single phone line

was described previously.

The input and output signals of the dialer module are shown in the ﬁgure below.

The input signals (L1_1_press, etc.) originate from button presses from the

Crestron Mobile symbol.

Figure 7. The inputs and outputs of the SymNet ATI Simple Dialer module.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Crestron PRO2 Bedienungsanleitung Seite 5