Crestron CNMK Spezifikationen PDF herunterladen (Seite 19)

Crestron CNMK Mouse/Keyboard Controller

Operations Guide – DOC. 5699A Mouse/Keyboard Controller: CNMK • 15

“Port Settings” Window

NOTE: The parameters shown in the illustration above are the port settings for a

2-Series control system. Consult the Operations Guide for the control system being

used for exact parameter selection.

4. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

established, refer to the “Troubleshooting Communications” section in

the latest version of the 2-Series Control System Reference Guide

(Doc. 6256) or the respective Operations Guide for the other control

systems.

Uploading a SIMPL Windows Program

A control system source file has

the extension .smw. A compiled

SIMPL Windows file has the

extension .spz for a 2-Series

control system, .bin for CNX

generation, and .csz for CNX

generation with SIMPL+.

The SIMPL Windows file can be uploaded to the control system using SIMPL

Windows or via the Crestron Viewport.

Upload via SIMPL Windows

1. Start SIMPL Windows.

2. Select File | Open to view the “Open” window, navigate to the SIMPL

Window file (.smw), and click Open.

3. Select Project | Transfer Program.

Upload via Crestron Viewport

1. Verify that the procedure for “Communication Settings” that begins on

page 13 has been performed.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

Crestron CNMK Spezifikationen Seite 19