Crestron C2N-IVDS24X24 Spezifikationen PDF herunterladen (Seite 20)

Intercom Video Distribution System Crestron C2N-IVDS24x24

C2Net Device, Slot 9

Setting the Net ID in Device Settings

Double-click the IVDS icon to open the “Device Settings” window. This window

displays the IVDS device information. If necessary, select the Net ID tab to change

the Net ID, as shown in the following figure.

“Device Settings” Window for the C2N-IVDS24x24

NOTE: SIMPL Windows automatically changes Net ID values of a device added to

a program if a duplicate device or a device with the same default Net ID already

exists in the program. Always ensure that the hardware and software settings of the

Net ID match. For Net ID hardware settings details, refer to “Identity Code” on page

C2N-IVDS24x24 Symbol in Programming Manager

Programming Manager is where programmers “program” a Creston control system

by assigning signals to symbols.

Analog Initialize

The inputs to the IVDS symbol require the analog equivalent of 0 through 24 (where

“0” is off) so that video outputs of the IVDS can be switched to any of the 24 video

inputs or turned off. Additionally, the analog equivalent of 0 through 3 (where “0” is

off) is required for setting the compensation levels of the eight CAT5 video inputs

(17through 24). Refer to “Video Input Compensation" on page 19 for more

information on setting compensation levels.

In SIMPL Windows, an Analog Initialize logic symbol, as shown in the following

diagrams, can be used to provide these analog inputs to the IVDS symbol.

16 • Intercom Video Distribution System: C2N-IVDS24x24 Operations Guide - DOC. 6171

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Keine Kommentare

Crestron C2N-IVDS24X24 Spezifikationen Seite 20