Crestron C2N-IVDS24X24 Spezifikationen PDF herunterladen (Seite 18)

Intercom Video Distribution System Crestron C2N-IVDS24x24

Hardware Connections for the C2N-IVDS24x24 (Back of the Unit is Shown)

CAT5 VIDEO INPUT FROM

BALANCED SOURCES

RCA VIDEO INPUT FROM

UNBALANCED SOURCES

CAT5 VIDEO OUTPUT TO

DEVICES WITH

BALANCED VIDEO INPUT

RCA VIDEO OUTPUT TO

DEVICES WITH RCA

VIDEO INPUT

TO CRESNET

SYSTEM

TO GROUND

NOTE: Signal compensation levels for inputs 17 through 24 are set via software

programming. Refer to “Video Input Compensation” on page 19.

Programming Software

Have a comment about Crestron

software?

Direct software related suggestions

and/or complaints to Crestron via

email (software@crestron.com)

. Do

not forward any queries to this

address. Instead refer to “Further

Inquiries” on page 26 for assistance.

Earliest Version Software Requirements for the PC

NOTE: Crestron recommends that you use the latest software to take advantage of

the most recently released features. The latest software is available from the

Downloads | Software Updates section of the Crestron website (www.crestron.com).

The following are the earliest useable software version requirements for the PC:

• SIMPL Windows version 2.04.14 or later. Requires SIMPL+ Cross

Compiler version 1.1.

• Crestron Database version 16.0 or later. Required by SIMPL Windows.

• Crestron Viewport version 3.35 or later.

Programming with SIMPL Windows

NOTE: The following assumes that the reader has knowledge of SIMPL Windows.

If not, refer to the extensive help information provided with the software.

NOTE: The following are acceptable file extensions for programs that include a

IADS, developed for specific control system types:

.smw projectname.smw (source file)

.spz projectname.spz (compiled file for 2-series)

.bin projectname.bin (compiled file for CNX generation)

.csz projectname.csz (compiled file for CNX generation with SIMPL+)

.ush projectname.ush (compiled file for CNX generation user SIMPL+

module header file)

.usp projectname.usp (source code module for SIMPL+)

.umc projectname.umc (user macro for SIMPL)

NOTE: In the following, the PRO2 control system is used.

14 • Intercom Video Distribution System: C2N-IVDS24x24 Operations Guide - DOC. 6171

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron C2N-IVDS24X24 Spezifikationen Seite 18

Kommentare zu diesen Handbüchern