Crestron CT-1600 Spezifikationen PDF herunterladen (Seite 14)

Wired Touchpanels Crestron Series 1600

Power Management Submenu

NOTE: Display backlight requires warm-up time. A display reaches 80% of its final

level in five minutes and full brightness in 20 minutes.

Power Management Submenu

The touchpanel display hardware life can be lengthened by turning off the backlight

when the touchpanel is inactive. The MANAGE POWER button is located in the

top left corner of the Setup Menu. Selection of this button changes the touchpanel

display to reveal the Power Management Submenu, shown to the left.

BACKLIGHT TIMEOUT is displayed on the Timeout Submenu. This setting turns

the backlight off when the touchpanel is inactive for a specified time frame (shown

in minutes). When the touchpanel is activated, the last screen to be displayed

reappears. A two-minute BACKLIGHT TIMEOUT is shown in the illustration.

Minutes can vary from 0 to 120, where 0 disables the timeout. DOWN and UP

buttons decrease and increase the timeout, respectively.

After the timeout parameter has been set, touch the SAVE TIMEOUT button in the

lower left corner of the screen to save the new settings. Touch the RETURN button,

located in the lower right corner of the screen, to display the Setup Menu.

Interface Submenu

The touchpanel communicates with a control system to activate other controls or to

display feedback from components within the system. The communication interface

must be correctly specified or communication will not occur. To set communication

parameters select the INTERFACE button located centrally in the top row of the

Setup Menu and display the Interface Submenu, shown to the left.

The Cresnet network identity number (NET ID) is displayed in the top left corner of

the Interface Submenu. NET ID is the two-digit hexadecimal number represented by

## in the figure for illustrative purposes. The hexadecimal number can range from 03

to FE and must correspond to the NET ID set in the SIMPL Windows program.

Matching NET IDs between touchpanel and program are required if data is to be

successfully transferred or new touchpanel screens are to be loaded. NET ID is

factory set to 03.

Two side-by-side buttons adjacent to the hexadecimal display, < CRESNET ID and

CRESNET ID >, decrease and increase the NET ID by one, respectively.

The touchpanel usually communicates with a Cresnet system. Occasionally the

touchpanel can be used in a local demo mode where it merely displays various

menus, but does not communicate with Cresnet system. In local mode, the directory

buttons change pages, but buttons requiring feedback do not work. Two centrally

located buttons on the Interface Submenu, CRESNET II and LOCAL, determine

communication mode. Select LOCAL to set the touchpanel into demo mode and

CRESNET II for normal Cresnet communication mode. Text within the selected

button changes color from black to red (for CT models) or black to gray (for LC

models). Communication mode is factory set to CRESNET II.

NOTE: RS-232 communication requires installation of a custom hardware option.

Two side-by-side buttons, RS-232 ON and RS-232 OFF, are centrally located on the

Interface Submenu. RS-232 is just for external control applications. Panel loading is

always available; RS-232 does not have to be on.

If the touchpanel is utilized in a system with optional RS-232 communication, ensure

that the RS-232 ON button is selected. Additional RS-232 parameters must be set

with the RS-232 Screen since alternative parameters may be required for successful

10 • Series 1600 Wired Touchpanels Operations & Installation Guide - DOC. 5836A

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron CT-1600 Spezifikationen Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Crestron CT-1600