Crestron CT-1600 Spezifikationen PDF herunterladen (Seite 13)

Crestron Series 1600 Wired Touchpanels

correct corner. Touch the corner of the screen to conclude calibration and return to

the Main Menu.

NOTE: When touching the screen during calibration, be as accurate as possible. A

fine tipped, but not sharp, object (i.e., pen cap) should be used to get the finest

possible resolution.

Diagnostics Menu

The DIAGNOSTICS button from the Main Menu should only be used under

supervision from a Crestron technical support representative during telephone

support. The options available from the Diagnostics Menu, shown to the left, are

beyond the scope of this manual.

Setup Menu

To obtain the Setup Menu, shown to the left, select the SETUP button from the

Main Menu. Many options for setting brightness, contrast, and panel tracking are

directly available from the Setup Menu. This menu also provides buttons

(MANAGE POWER, INTERFACE, and SOUND) that open submenus for

specific features. After setup parameters have been set, select the RETURN button,

located at the lower right corner of the Setup Menu.

Brightness

Screen brightness may need to be altered because of ambient light conditions or

personal preference. Three brightness buttons, BRT LOW, BRT MED, and BRT

HI, located in the bottom row of the Setup Menu may be selected to assign

brightness setting. Current brightness setting is shown in red rather than black text

(for CT models) or gray rather than black text (for LC models).

Contrast

Screen contrast may need to be altered because of ambient light conditions, panel

temperature, or personal preference. Two contrast buttons, CONT << and CONT

>>, on the Setup Menu may be held down for continuous and smooth adjustment of

the screen.

Panel Tracking

Panel tracking is a useful communication feature between touchpanels when more

than one touchpanel exists on the network. Panel tracking is enabled when the

PANEL TRACKING button, located on the right side of the center row of the Setup

Menu, is selected. Selection is indicated with red text (for CT models) or gray (for

LC models). When enabled, a given touchpanel maintains communication in such a

way that a page change to any touchpanel on the network forces the same page

change to all enabled touchpanels. Panel tracking is disabled when the PANEL

TRACKING button is deselected. When disabled a given touchpanel does not

respond to page changes made to other touchpanels on the network. Panel tracking is

factory set with the PANEL TRACKING button deselected.

Operations & Installation Guide - DOC. 5836A SeriesSeries 1600 Wired Touchpanels • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Keine Kommentare

Crestron CT-1600 Spezifikationen Seite 13