Crestron CT-1550 Spezifikationen PDF herunterladen (Seite 22)

Wired 5.7 Inch Tabletop Touchpanel Crestron CT-1550

• Wired 5.7 Inch Tabletop Touchpanel: CT-1550 Operations Guide – DOC. 6116A

Settings” window are selected as shown after this step. Click the OK

button to save the settings and close the window.

NOTE: If problems occur when transferring any Cresnet file (touchpanel

project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus

speed when transferring through a control system. Make sure XModem is selected

from Mode for Network Transfers.

“Port Settings” Window

5. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

established, refer to the “Troubleshooting Communications” section in

the latest version of the Crestron 2-Series Control Systems Reference

Guide (Doc. 6256) or the respective Operations Guide for the control

system.

Uploading a SIMPL Windows Program

A control system source file has the

extension .smw. A compiled SIMPL

Windows file has the extension .spz

or a 2-Series control system, .bin

or CNX generation, and .csz for

CNX generation with SIMPL+.

The SIMPL Windows file can be uploaded to the control using SIMPL Windows or

via the Crestron Viewport.

Upload via SIMPL Windows

1. Start SIMPL Windows.

2. Select File | Open to view the “Open” window, navigate to the SIMPL

Window file (.smw), and click Open.

3. Select Project | Transfer Program.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

Crestron CT-1550 Spezifikationen Seite 22