Crestron BB-1600 Bedienungsanleitung PDF herunterladen (Seite 8)

Back Box Crestron BB-1600

4 •• Back Box: BB-1600 Installation Guide - DOC. 5835A

Securing Metal Electrical Box to Stud

SCREW

HOLES

0.50 in

(1.27 cm)

CUT AWAY

METAL

ELECTRICAL

BOX

STUD

4. Use two #6 screws, not supplied, to secure metal electrical box to

the stud.

5. Pull Cresnet wire through open knockout(s) in metal electrical

box.

NOTE: Wait for gypsum board to be hung before continuing with

remainder of construction method installation.

6. Fasten template, supplied, to mounting surface; cut out and

remove the traced shape.

7. Drill four 5/16” holes as marked on template. Only drill through

gypsum board. Use caution and do not drill through metal bracket

that rests behind gypsum board. Refer to "Cutout Detail of

Supplied Template" on page 10 for an illustrative reference.

8. Drill eight holes marked “A” on template with #20 bit. Only drill

through gypsum board. Use caution and do not drill through

metal bracket that rests behind gypsum board. Refer to "Cutout

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Crestron BB-1600 Bedienungsanleitung Seite 8