Crestron BB-1600 Bedienungsanleitung PDF herunterladen (Seite 10)

Back Box Crestron BB-1600

6 •• Back Box: BB-1600 Installation Guide - DOC. 5835A

6. Drill eight holes marked “A” with #20 drill. Refer to "Cutout

Detail of Supplied Template" on page 10 for an illustrative

reference.

7. Slide one metal mounting bracket through the opening and

position it inside along the top horizontal edge.

8. Position one metal mounting plate along the top horizontal edge

so that it covers the two center holes marked “A”.

9. Use two pan head screws, supplied, to secure the bracket and

plate to the mounting surface. Tighten by hand; do not fully

tighten screws.

Securing Bracket/Plate Assembly to Top and Bottom Edges of

Opening

DRYWALL

METAL

MOUNTING

BRACKET

METAL

MOUNTING

PLATE

(MOUNTS

BRACKET

AND PLATE

IN TWO

CENTER

TAPPED

HOLES)

TWO PAN

HEAD

SCREWS

10. Repeat steps 7 through 9 for the bottom horizontal edge of the

opening.

11. Remove necessary knockout(s) from metal electrical box.

12. Pull Cresnet wire through open punch in metal electrical box.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Crestron BB-1600 Bedienungsanleitung Seite 10