Crestron FlipTop FT-TS600 Installationsanleitung PDF herunterladen (Seite 23)

Crestron FT-TSC600 FlipTop Touch Screen Control System

Operations & Installation Guide – DOC. 7593A FlipTop Touch Screen Control System: FT-TSC600 • 19

“Ethernet Setup” Menu (Additional Parameters)

The additional parameters are Subnet Mask, Default Router, Mac Address and

Domain. For Subnet Mask, Default Router or Domain, touch Edit on the right side of

the menu to open on-screen keyboards like the ones described above.

After all new settings have been made, touch Reboot at the bottom of the “Ethernet

Setup” menu to reboot the touch screen, so the new settings can take effect.

Touch Advanced Settings to display the “Advanced Ethernet Setup” menu.

“Advanced Ethernet Setup” Menu

The “Advanced Ethernet Setup” menu provides controls for enabling or disabling

SSL (Secure Sockets Layer, a protocol for encrypting information over the Internet)

and for editing the CIP Port, Secure CIP Port, CTP Port and Secure CTP Port.

The SSL controls work as follows:

• Off disables the SSL capabilities of the FT-TSC600

• Self sets up self signing certificates

• CA uses an authority to assign the SSL certificates

NOTE: For more details on SSL settings, refer to the 3-Series Control Systems

Reference Guide (Doc. 7150) at www.crestron.com/manuals.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Keine Kommentare

Crestron FlipTop FT-TS600 Installationsanleitung Seite 23