Crestron TPS-ENET Installationsanleitung PDF herunterladen (Seite 15)

Crestron TPS-ENETL Ethernet Card for TPS/Lectern Panel

Attach Ethernet Cable

CABLE

FROM

ETHERNET

NOTE: Refer to the latest revision of the TPS-5000L, TPS-6000L, or

TPS-TPI Operations Guide (Doc. 5825, 5783, or 5855, respectively) or,

if applicable, BB-5000 or BB-6000 Installation Guide (Doc. 5826 or

5827, respectively) for the proper installation procedure of the

touchpanel. The latest version of the appropriate guide can be obtained

from the Downloads | Product Manuals section of Crestron’s website

(www.crestron.com)

Obtaining Communications

To setup the touchpanel for Ethernet communication, it is necessary to

first obtain communication with the device. Communication with the

touchpanel can be established via the local RS-232 port or the host

control system via the remote console mode (Cresnet).

To obtain communication with the touchpanel via RS-232, refer to the

procedure below. To obtain communication with the touchpanel via the

host control system, refer to the remote console procedure beginning on

page 14.

Operations & Installation Guide - DOC. 6013 Ethernet Card for TPS/Lectern Panel: TPS-ENETL • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Keine Kommentare

Crestron TPS-ENET Installationsanleitung Seite 15