Crestron ST-VS Spezifikationen PDF herunterladen (Seite 17)

Crestron ST-VS Video Sensor Module

3. Select RS-232 as the connection type. Verify that an available COM port

(COM 1 is shown after this step) is selected, and that all communication

parameters and necessary options from the “Port Settings” window are

selected as shown after this step. Click the OK button to save the settings

and close the window.

“Port Settings” Window

NOTE: The parameters shown in the illustration above are the port settings for a

2-Series control system. Consult the Operations Guide for the control system being

used for the exact parameter selection.

4. To verify communication, select Diagnostics | Establish Communications

(Find Rack). This should display a window that gives the COM port and

baud rate. If communications cannot be established, refer to the

“Troubleshooting Communications” section in the respective Operations

Guide for the control system.

Uploading a SIMPL Windows Program

A control system source file has

the extension .smw. A compiled

SIMPL Windows file has the

extension .spz for a 2-Series

control system, .bin for CNX

generation, and .csz for CNX

generation with SIMPL+.

The SIMPL Windows file can be uploaded to the control system using SIMPL

Windows or via the Crestron Viewport.

Upload via SIMPL Windows

1. Start SIMPL Windows.

2. Select File | Open to view the “Open” window, navigate to the SIMPL

Window file (.smw), and click Open.

3. Select Project | Transfer Program.

Operations Guide – DOC. 5767A Video Sensor Module: ST-VS • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Crestron ST-VS Spezifikationen Seite 17