Crestron C2N-ANLZ Spezifikationen PDF herunterladen (Seite 13)

Crestron C2N-ANLZ Cresnet

Analyzer

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade, it is necessary to establish

communication.

Establishing Communication

Use Crestron Toolbox for communicating with the C2N-ANLZ; refer to the Crestron

Toolbox help file for details. There is a single method of communication; direct

serial communication.

Direct Serial Communication

PC RUNNING

CRESTRON TOOLBOX

C2N-ANLZ

SERIAL VIA

STRAIGHT-THROUGH

CABLE

• The COMPUTER port on the C2N-ANLZ connects to the serial port on

the PC via the included straight-through serial cable.

• Use the Address Book in Crestron Toolbox to create an entry using the

expected serial communication protocol (RS232, auto-detect baud rate, no

parity, 8 data bits, 1 stop bit, XON/XOFF disabled, RTS/CTS enabled).

• Open a “Text Console” window (click the

icon) or display the

C2N-ANLZ’s “System Info” window (click the

icon); using the

address book entry for the C2N-ANLZ; communications are confirmed

when the C2N-ANLZ prompt is displayed (in the “Text Console” window)

or when the device information is displayed (in the System Info window).

Firmware

Upgrade the C2N-ANLZ firmware via Crestron Toolbox.

• Establish communications with the C2N-ANLZ and display the “System

Info” window.

• Select Functions | Firmware… to upgrade the C2N-ANLZ firmware.

For details on upgrading firmware, refer to Crestron Toolbox help file.

Operations Guide – DOC. 6473 Cresnet

Analyzer: C2N-ANLZ • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Crestron C2N-ANLZ Spezifikationen Seite 13