Crestron TPS-ENETL Spezifikationen Seite 11
- Seite / 52
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Crestron Isys™ TPS-6000L 15 Inch Lectern Touchpanel
The required wire gauge should be chosen such that the resistance value is less than
the value calculated in the resistance equation. Refer to the table after this paragraph.
Wire Gauge Values
RESISTANCE (R) WIRE GAUGE
4
16
6
18
10
20
15
22
13
Doubled CAT5
8.7
Tripled CAT5
NOTE: All network wiring must consist of two twisted-pairs. One twisted pair is
the +24V conductor and the GND conductor and the other twisted pair is the Y
conductor and the Z conductor.
NOTE: When daisy-chaining Cresnet units, strip the ends of the wires carefully to
avoid nicking the conductors. Twist together the ends of the wires that share a pin on
the network connector, and tin the twisted connection. Apply solder only to the ends
of the twisted wires. Avoid tinning too far up the wires or the end becomes brittle.
Insert the tinned connection into the Cresnet connector and tighten the retaining
screw. Repeat the procedure for the other three conductors.
Hardware Hookup
The TPS-6000L touchpanel installs simply and cleanly into existing or newly
constructed walls, with back box and drywall mounting options.
Back Box Mounting
Back box mounting is typically used at new construction sites. The optional back
box, BB-6000, includes the necessary hardware, brackets and electrical box, which
provides a secure enclosure that, can be fastened directly to a stud. The details for
this optional mounting method are provided in the latest revision of the BB-6000
Installation Guide (Doc. 5826). After completing the steps in the installation guide,
simply mate the four posts of the bezel with the holes drilled into the mounting
surface and firmly press the bezel over the touchpanel.
NOTE: The mounting hardware and accessories supplied with the TPS-6000L are
not required for the back box mounting option.
Direct Mounting
The TPS-6000L is a low-voltage unit that can be installed directly into a mounting
surface. Each touchpanel is provided with mounting hardware and accessories, as
shown in the table after this paragraph.
Operations Guide - DOC. 5825 15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L • 7
- Contents 3
- 15 Inch Lectern Touchpanel: 5
- Crestron Isys™ TPS-6000L 5
- Expansion Slots 6
- I/O Connectors 6
- PIN DESCRIPTION 7
- Physical Description 8
- Leading Specifications 9
- Installation/Setup 10
- Hardware Hookup 11
- ITEM PART NUMBER QUANTITY 12
- Cover Touchpanel with Bezel 13
- Configuring the Touchpanel 14
- Diagnostics Menu 15
- Setup Menu 15
- Panel Tracking 16
- Ethernet 16
- Standby Timeout 16
- Brightness 16
- Return 17
- Interface Menu 17
- RS-232 Menu 18
- Audio Menu 19
- RGB Menu 20
- Video Menu 22
- How the Program Works 25
- How to Create the Program 25
- Programming Manager 26
- Reserved Join Numbers 28
- Problem Solving 30
- Further Inquiries 31
- Downloadable WAV Files 32
- To Record a WAV File Message 33
- To Convert a WAV File 34
- Open Sound Recorder 35
- Insert First WAV File 36
- Open First WAV File 36
- File Insertion Point 37
- Insert Another WAV File 37
- Access File Properties 38
- Select File Format 39
- Select File Attributes 39
- Set the File Properties 40
- Save File 40
- VT Pro-e: Sound Manager 41
- Sound Manager Guidelines 42
- Using Sound Manager 43
- Appendix B: RS-232 Protocol 44
- TEMPLATE 46
- FOR TPS-6000LB OR 46
- TPS-6000LW 46
- UNIT CUTOUT 46
- Software License Agreement 47
- PROPRIETARY RIGHTS 48
- GOVERNING LAW 48
- CRESTRON LIMITED WARRANTY 48
- Return and Warranty Policies 49
Verwandte Produkte und Handbücher für Vernetzung Crestron TPS-ENETL
Vernetzung Crestron QM-MD16X16 Spezifikationen
(32 Seiten)
(32 Seiten)
Vernetzung Crestron TPS-IMC Spezifikationen
(20 Seiten)
(20 Seiten)
Vernetzung Crestron ST-LT Spezifikationen
(32 Seiten)
(32 Seiten)
Vernetzung Crestron CNHBLOCK Spezifikationen
(12 Seiten)
(12 Seiten)
Vernetzung Crestron ST-IO Spezifikationen
(24 Seiten)
(24 Seiten)
Vernetzung Crestron CNRFT-48A Spezifikationen
(14 Seiten)
(14 Seiten)
Vernetzung Crestron TPS-IMW Spezifikationen
(48 Seiten)
(48 Seiten)
Vernetzung Crestron CNXRY-16 Bedienungsanleitung
(12 Seiten)
(12 Seiten)
Vernetzung Crestron CH-HREL8-D6 Handbuch
(12 Seiten)
(12 Seiten)
Vernetzung Crestron NAT Installationsanleitung
(22 Seiten)
(22 Seiten)
Vernetzung Crestron CP3 Spezifikationen
(32 Seiten)
(32 Seiten)
Thermo-fisher-scientific Eutech pH 5/6 Plus & Ion 6 Plus (Old version E manuály
Uživatelské manuály a uživatelské příručky pro Nástroje Thermo-fisher-scientific Eutech pH 5/6 Plus & Ion 6 Plus (Old version E.
Poskytujeme 1 manuály pdf Thermo-fisher-scientific Eutech pH 5/6 Plus & Ion 6 Plus (Old version E ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Kommentare zu diesen Handbüchern