Crestron QM-MD16X16 Spezifikationen PDF herunterladen (Seite 26)

16X16 QuickMedia™ Matrix Switcher Crestron QM-MD16X16

Operation

Operating Modes

The QM-MD16X16 operates in either the System mode or the Local mode.

System Mode

Switching functions controlled by control system program. While in the Local mode,

press the SYS button to activate System mode. The SYS LED will light.

• When in System mode, pressing input or output buttons shows

source/destination information.

Local Mode

Switching functions controlled by front panel buttons. Press LOCAL to activate

Local mode (accompanying LED will flash).

• Local mode may not be available if the buttons on the front panel are locked

by the control system. If the buttons are locked, the LOCAL LED will

rapidly flash three times and turn off. The front panel can only be unlocked

with control system programming.

System Mode Operation-Viewing Signal Routing

Viewing Source Routing

Press an input signal button to display all of the outputs that are connected to it.

Viewing Output Routing

Press an output signal button to display the input signal that is connected. All outputs

that are receiving the same input signal are also displayed.

The AUDIO BREAK LED will illuminate if there is any difference between the

audio and video route for any signal. The A and V LEDs indicate which portion of a

signal is displayed. Press A or V to select the portion to display.

NOTE: The AUDIO BREAK button has no function when the QM-MD16X16 is

operating in the System mode.

Local Mode Operation-Switching Signal Routing

Signals coming in to the QM-MD16X16 can be switched to individual or multiple

output locations. Additionally, the audio and video portions of an input signal can be

switched simultaneously or separately.

Switching Audio & Video

Simultaneously

1. Press LOCAL to place the QM-MD16X16 in the Local mode (the LOCAL

LED is flashing slowly).

2. Press AUDIO BREAK to turn off the audio break function. The AUDIO

BREAK LED will turn off and the V LED will be on.

NOTE: If any outputs have different audio and video sources, the audio

inputs will switch to match the video inputs.

3. Press the button corresponding to the input to be switched. The LED of the

selected input will light.

4. Press the button(s) corresponding to the output(s) to be switched. The

LED(s) of the selected output(s) will light.

22 • 16X16 QuickMedia™ Matrix Switcher: QM-MD16X16 Operations Guide – DOC. 6538A

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron QM-MD16X16 Spezifikationen Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Crestron QM-MD16X16