Crestron CNRFGWX Spezifikationen PDF herunterladen (Seite 13)

Crestron CNRFGWA Wireless RF Receiver

Operations Guide - DOC. 8086A Wireless RF Receiver: CNRFGWA • 9

2. Refer to the figure after this step. From the Viewport menu, select

Setup | Communications settings (alternatively, press Alt+D) to open

the “Port Settings” window.

Setup | Communications Settings Command

3. Select RS-232 as the connection type. Verify that an available COM

port (COM 1 is shown below) is selected, Verify that the baud rate is

set to 38400 (PRO 2 default), the parity is None, the data bits is Eight,

the stop bits is One, XON/XOFF is not selected, and RTS/CTS is

selected. Click the OK button to save the settings and close the

window.

“Port Settings” Window

NOTE: The parameters shown in the illustration above are the port settings for a 2-

Series control system. Consult the Operations Guide for the control system being

used for exact parameter selection.

4. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

established, refer to the “Troubleshooting Communications” section in

the respective Operations Guide for the control system.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Crestron CNRFGWX Spezifikationen Seite 13