Crestron CT-1600 Betreibershandbuch PDF herunterladen (Seite 14)

BROWN UNIVERSITY: Barus & Holley: Auditorium

Audiovisual System Operator’s Manual Page 13

Slide Presentations

A slide projector in the rear of the room is also remotely controlled by the touch

panel. It is enclosed in a wooden structure with a clear cabinet door, to allow for

loading or unloading of slide trays.

1) Power up the audiovisual system (see “Powering the System On/Off”).

2) Load a tray of slides into the projector. Align the notched edge of the tray

with the middle of the handle bar on the side of the projector. The tray will

snap into place. Close the cabinet door when finished.

3) From the Presentation page, press the “SLIDES” button. The “SLIDES” page

will appear.

4) Press the “POWER ON” button to power up the projector. No image will be

projected until a slide falls into the projector slot from the tray.

5) Press the “FWD” and “REV” buttons to move forward and backward through

the slide tray.

6) Press the “FOCUS +” and “FOCUS –“ buttons to adjust the sharpness of the

picture.

7) When finished, press the button labeled “POWER OFF”. This turns off the

slide projector only and should not be confused with the power buttons on the

“POWER ON/OFF” page.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Crestron CT-1600 Betreibershandbuch Seite 14