Crestron CPC-2000A Spezifikationen PDF herunterladen (Seite 3)

Crestron CPC-CAMI Pan/Tilt Camera Head with Control Interface

Pan/Tilt Camera Head with

Control Interface: CPC-CAMI

Description

Functional Description

The CPC-CAMI is an integrated pan/tilt head and network control interface

belonging to the Crestron ProCam family of network camera control. The unit has

been designed to provide control of a remotely positioned video camera site. Control

is defined as the two-axis motion of the pan/tilt unit and the focus/zoom setting of a

camera lens.

The CPC-CAMI provides exclusive SpeedSmart™ technology to assure the fastest -

yet smoothest - camera response possible. Pulse width modulation insures high

speed resolution and the unit possesses a remarkable ability to repeat preset

positions. When connected to a Crestron control system, the unit’s “whisper-quiet”

movement of a camera/lens assembly is controlled by its own built-in network

control interface.

Jumper Boards

Four supplied jumper boards permit the support of any camera/lens assembly

requiring an input voltage in the range of +/-2.5 to +/- 12 VDC. Thus a single

CPC-CAMI with its four jumpers can control nearly any camera/lens in the industry.

Refer to the table below for exact voltage outputs for each jumper board.

NOTE: If no jumper board is connected to the CPC-CAMI, the lens outputs are

disconnected.

Jumper Board Options

JUMPER BOARD VOLTAGE CONFIGURATIONS LENSES CONTROLLED

LENS A +/- 12 VDC differential drive

Panasonic WV-LZ81/10, Canon J6x11 REA-IA-II,

Daiwa/CSI, and Cosmicar H6ZAHE-2P and

C6Z1218H2ESP-2

LENS B +/- 8 VDC differential drive H1020812 AMSP, Daiwa/CSI, and Computar H10Z0812M

LENS C

+/- 2.5 VDC single ended drive with lens

supplied reference (implements 2.5V to

7.5V with lens supplied center (5V))

Fujinon MD, BMD and SD series, JVC HZ-713MD,

Daiwa/CSI, and Canon KTS/KTS-A series

LENS D +/- 6 VDC differential drive Daiwa/CSI and Vicon M & MS series

Operations Guide - DOC. 5726A Pan/Tilt Camera Head with Control Interface: CPC-CAMI • 1

1 2 3 4 5 6 7 8 ... 23 24

Keine Kommentare

Crestron CPC-2000A Spezifikationen Seite 3