Crestron CP3N Technical Information PDF herunterladen (Seite 7)

Crestron 3-Series Control Systems Reference Guide

Reference Guide – DOC. 7150A 3-Series Control Systems • 3

Crestron Fusion and SNMP

As part of a complete managed network in a corporate enterprise, college campus,

convention center or any other facility, 3-Series processors work integrally with

Crestron Fusion RV

Remote Asset Management Software to enable remote

scheduling, monitoring, and control of rooms and technology from a central help

desk. Built-in SNMP (Simple Network Management Protocol) support enables

integration with third-party network management software, allowing control and

monitoring in a format that is familiar to IT personnel.

Cresnet

Cresnet provides a dependable network wiring solution for Crestron keypads,

lighting controls, thermostats, and other devices that do not require the higher speed

of Ethernet. The Cresnet bus offers easy wiring and configuration, carrying

bidirectional communication and 24 Vdc power to each device over a simple

4-conductor cable. To assist with troubleshooting, the 3-Series Control System

includes our patent pending Network Analyzer, which continuously monitors the

integrity of the Cresnet network for wiring faults, marginal performance, and other

errors.

Onboard Control Ports

In addition to Ethernet, each 3-Series Control System includes bidirectional COM

ports and IR ports to interface directly with all centralized AV sources, video

displays, and other devices. Programmable relay ports are included for controlling

window shades, projection screens, lifts, power controllers, and other contact-closure

actuated equipment. The AV3, PRO3, CP3, and CP3N provide “Versiport” I/O ports

that enable the integration of occupancy sensors, power sensors, door switches, or

anything else that provides a dry contact closure, low-voltage logic, or 0–10 Volt dc

signal. The MC3 also provides two digital inputs for use with Crestron occupancy

sensors, power sensors, door switches, or anything that provides a dry contact

closure or low-voltage logic signal.

BACnet/IP

Native support for the BACnet/IP communication protocol provides a direct

interface to third-party building management systems over Ethernet, simplifying

integration with HVAC, security, fire and life safety, voice and data, lighting,

shades, and other systems. Using BACnet/IP, each system runs independently with

the ability to communicate together on one platform for a truly smart building.

Dedicated Control Subnet (AV3, PRO3, and CP3N only)

The Crestron Control Subnet is a Gigabit Ethernet network dedicated to Crestron

devices. Via the control system’s Control Subnet port, an installer may simply

connect a single touch screen or wireless gateway, or add a Crestron PoE switch

(CEN-SW-POE-5, CEN-SW-POE-16, or CEN-SWPOE-24—all sold separately) to

handle multiple touch screens, gateways, AV components, and other devices. Auto-

configuration of the entire subnet is performed by the control system, discovering

each device and assigning IP addresses without any extra effort from the installer.

A separate LAN port on the control system provides a single-point connection to the

customer’s LAN, requiring just one IP address for the complete control system. The

LAN port allows full interconnectivity between devices on the local subnet with

other devices, systems, servers, and WAN/Internet connections outside the local

subnet. For sensitive applications that require absolute security, the entire Control

Subnet can be completely isolated from the customer’s LAN using Isolation mode.

1 2 3 4 5 6 7 8 9 10 11 12 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron CP3N Technical Information Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Crestron CP3N