Crestron TPS-IMW Spezifikationen

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Operations Guide

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Physical Views of the TPS-4000 Touchpanel (Top and Bottom) 3.90 in(9.91 cm)0.75 in(1.91 cm)5.40 i

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Interface Modules Connect the TPS-4000 to an outboard interface module, which provides expanded n

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 (2) this device must accept any interference received, including interference that may cause unde

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel NOTE: All network wiring must consist of two twisted pairs. One twisted pair is the +24V conduct

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Calibration Menu CALIBRATION MENU Calibration of the touchscreen is required if the active touch

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel transferred. The Net ID for the TPS-4000 is factory set to 03. No two devices in the same system

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 2. Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Screen Settings SCREEN SETTINGS The touchpanel screen’s brightness may need to be adjusted beca

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Diagnostics Menu DIAGNOSTICS MENU The Diagnostics button from the MAIN MENU should only be used

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel AUDIO Pinouts TYPE PIN DESIGNATION DESCRIPTION 1 L+ Left Input (Positive) 2 L- Left Input (Ne

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 NET/VIDEO This 10-pin RJ-45 connector mates with the TPS-IMPC or TPS-IMW interface module using a

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Programming Software Have a question or comment about Crestron software? Answers to frequently a

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Digital, analog and serial join numbers are a common thread between VT Pro-e and SIMPL Windows. T

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the S

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 “Device Settings” Window for the TPS-4000 NOTE: SIMPL Windows automatically changes Net ID value

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel For additional information, refer to the latest version of the Crestron SIMPL Windows Symbol Guid

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Analog Output Signal Descriptions OUTPUT DESCRIPTION an_act 1 through an_act 4000 Notifies contr

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel interfaced with the system and thus cannot initiate any functions. The completed and compiled pro

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 NOTE: WAV files (for the TPS-4000 touchpanel) can be obtained from the Wave LC Library of the Cr

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 3. There are three system-wide join numbers that the designer can define. The first, sound playi

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Contents 10.4 Inch Tilt Touchpanel: Crestron Isys® TPS-4000 1 Introduction ...

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 5. Select a WAV file in the Sound List table and click Properties to open the “Sound Properties”

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Audio Digital Reserved Join Numbers for TPS-4000 Touchpanels JOIN # FUNCTION VALUE IN/OUT 1730

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 they will not be compiled correctly in SIMPL Windows. In other words, you cannot enter Chinese ch

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel To prepare the TPS-4000 for uploading or upgrading, refer to the following figure for a typical c

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Setup | Communications Settings Command 3. Select RS-232 as the connection type. Verify that an

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel baud rate. If communication cannot be established, refer to the “Troubleshooting Communications”

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 “Send Program” Window 4. To verify that the program has been transferred successfully, select D

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel File Transfer | Send Touchpanel Command 3. As shown after this step, select the Net ID of the T

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 “Open” Window 5. Select the VT Pro-e (.vtz) file and click Open. The transfer will complete aut

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel “Select Network ID” Window Check Send Direct to Wired Touchpanel if connected via RS-232 directl

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Problem Solving Troubleshooting The table after this paragraph provides corrective action for pos

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Further Inquiries If, after reviewing this Operations Guide, you cannot locate specific informati

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Appendix: Configuring the RS-232 Port for Use To configure the RS-232 port of the TPS-4000, a lo

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 4. Enter a command that chooses one of the RS-232 communication options. Use the same spelling a

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel If You are a business or organization, You agree that upon request from Crestron or its authorize

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be retur

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel This page is intentionally left blank. Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel:

Crestron Electronics, Inc. Operations Guide – DOC. 6268 15 Volvo Drive Rockleigh, NJ 07647 05.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specif

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 10.4 Inch Tilt Touchpanel: Crestron Isys® TPS-4000 Introduction Features and Functions The TPS-4

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Multiple graphics can be displayed on the TPS-4000 without any shift in color depth or quality. T

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Specifications The following provides a summary of specifications for the TPS-4000 touchpanel. Sp

10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Specifications for the TPS-4000 Touchpanel (continued) SPECIFICATION DETAILS Video (continued) •

Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Physical Description The TPS-4000’s 10.4-inch (26.42 cm) touch sensitive viewing screen is locate