Crestron TPS-CBL-T Spezifikationen PDF herunterladen (Seite 45)

Crestron TPS-12L/15L/17L Isys

Wall Mount Touchpanels

Connect the Device

Make the necessary connections as called out in the illustration on the following

page. Refer to “Network Wiring” on page 21 before attaching the 4-position terminal

block connector. Apply power after all connections have been made.

CAUTION: Do not apply excessive pressure to the touchscreen display during

handling. Doing so can crack the screen and damage the touchpanel.

NOTE: The maximum continuous current from equipment under any external load

conditions shall not exceed a current limit that is suitable for the minimum wire

gauge used in interconnecting cables. The ratings on the connecting unit's supply

input should be considered to prevent overloading the wiring.

NOTE: The headphone output is for WAV and Line audio only. It does not carry

the microphone signal. Use the AUDIO OUT on the TPMC-CH-IMC for the

microphone signal.

NOTE: TPS-12L/15L/17L touchpanels include a TPMC-CH-IMC Interface Module

for system connection. The TPMC-CH-IMC serves as an interface between the

touchpanel, external A/V system, microphone output and the Cresnet system. Refer

to the TPMC-CH-IMC Operations Guide (Doc. 6345) for hardware hookup using

this interface.

NOTE: For CAT5 and QuickMedia connections, use Crestron Certified Wire.

NOTE: Crestron recommends an independent power supply for the touchpanel.

Operations Guide – DOC. 6355A Isys

Wall Mount Touchpanels: TPS-12L/15L/17L • 41

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 65 66

Keine Kommentare

Crestron TPS-CBL-T Spezifikationen Seite 45