Crestron TPS-5000 Spezifikationen PDF herunterladen (Seite 22)

12 Inch Lectern/Wall Mounted Touchpanel Crestron Isys™ TPS-5000L

MIC Pinouts-Balanced

PIN # DESIGNATION DESCRIPTION

1 M+ Mic Output (Positive)

2 M- Mic Output (Negative)

3 S Shield

NOTE: For unbalanced line level microphone output, connect pins 1 & 3. No

connection should be made to pin 2.

NET

This 4-position Cresnet connector provides Cresnet network connection from the

touchpanel as well as power to the touchpanel. A description of the pinouts is shown

in the table after this paragraph. Refer to “Network Wiring” on page 7 for details.

NET Pinouts

PIN # DESIGNATION DESCRIPTION

1 24 Power

2 Y Data

3 Z Data

4 G Ground

RS-232

This 6-position RJ11 connector mates with a serial port of a PC. The connecting

cable is not supplied. Prior to installation, use this port for direct connection between

the touchpanel and a PC to load files to a touchpanel without a network connection.

In the event that modular cables or an RJ11 to DB9F adapter is not available, the

table below and diagram on the next page provide information so that the cable can

be fabricated on site. Refer to “RS-232 Menu” on page 11 for proper RS-232 port

configuration settings. Also refer to “Appendix A: RS-232 Protocol” on page 45 for

protocol details.

RS-232 Pinouts

PIN # DESCRIPTION

1 CTS

2 GND

3 RXD

4 TXD

5 RTS

6 N/C (Not connected)

Front

Top

18 • 12 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-5000L Operations Guide - DOC. 5783A

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Keine Kommentare

Crestron TPS-5000 Spezifikationen Seite 22