Crestron CP3 Bedienungsanleitung PDF herunterladen (Seite 3)

CP3 3-Series Control System

crestron.com

800.237.2041

I/O 1 – 8: (1) 9-pin 3.5mm detachable terminal block comprising

(8) “Versiport” digital input/output or analog input ports (referenced

to GND);

Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic

threshold >3.125V low/0 and <1.875V high/1;

Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for

use with “real world” loads;

Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum,

input impedance 21k Ohms with pull-up resistor disabled;

Programmable 5 Volts, 2k Ohms pull-up resistor per pin

IR - SERIAL OUTPUT 1 – 8: (2) 8-pin 3.5mm detachable terminal block

comprising (8) IR/Serial output ports;

IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

COM 1: (1) 5-pin 3.5mm detachable terminal block;

Bidirectional RS-232/422/485 port;

Up to 115.2k baud; hardware and software handshaking support

COM 2 – 3: (2) 3-pin 3.5mm detachable terminal blocks;

Bidirectional RS-232 ports;

Up to 115.2k baud; software handshaking support

MEMORY: (1) SD memory card slot;

Accepts one SD or SDHC card up to 32 GB for memory expansion

USB: (1) USB Type A female;

USB 2.0 port for storage devices

LAN: (1) 8-wire RJ45 jack;

10Base-T/100Base-TX Ethernet port

NET: (1) 4-pin 3.5mm detachable terminal block, Cresnet master port;

Outputs power to Cresnet devices if a power pack is connected to the

24VDC power input jack;

Receives Cresnet network power if no power pack is connected to the

24VDC power input jack;

See “Power Requirements” for additional specifications

24VDC 2.0A: (1) 2.1 x 5.5 mm DC power connector;

24 Volt DC power input, PW-2420RU power pack included;

Passes through to NET port to power Cresnet devices;

See “Power Requirements” for additional specifications

G: (1) 6-32 screw, chassis ground lug

COMPUTER (front): (1) USB Type B female;

USB 2.0 computer console port (6 ft cable included);

For setup only

Controls & Indicators

PWR: (1) Green LED, indicates operating power supplied from power pack

or Cresnet network

NET: (1) Amber LED, indicates communication with the Cresnet system

MSG: (1) Red LED, indicates control system has generated an

error message

HW-R: (1) Recessed pushbutton for hardware reset

SW-R: (1) Recessed pushbutton for software reset

LAN (rear): (2) LEDs, green LED indicates Ethernet link status, amber LED

indicates Ethernet activity

Power Requirements

Power Pack: 2.0 Amps @ 24 Volts DC;

100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included

Available Cresnet Power: 24 Watts (1 Amp @ 24 Volts DC) when using

power pack

Cresnet Power Usage: 15 Watts (0.625 Amp @ 24 Volts DC) when using

Cresnet network power

Environmental

Temperature: 41° to 113°F (5° to 45°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation: 50 BTU/Hr

Enclosure

Chassis: Metal, black finish

Faceplate: Extruded metal, black finish, polycarbonate label overlay

Mounting: Freestanding or 1U 19-inch rack-mountable (adhesive feet and

rack ears included)

Dimensions

Height: 1.70 in (44 mm) without feet

Width: 17.28 in (439 mm), 19.00 in (483 mm) with rack ears

Depth: 6.56 in (167 mm)

Weight

3.12 lb (1.42 kg)

MODELS & ACCESSORIES

Available Models

CP3: 3-Series Control System

CP3-GV: 3-Series Control System

- Government Version

Included Accessories

PW-2420RU: Power Pack, Desktop, 24VDC, 2A (50 Watts), Regulated,

US/International (Qty. 1 included)

Available Accessories

C2N-HBLOCK: Multi-type Cresnet Distribution Block

CNTBLOCK: Cresnet Distribution Block

CNSP-XX: Custom Serial Interface Cable

IRP2: IR Emitter Probe w/Terminal Block Connector

Crestron

App: Control App for Apple

iOS

& Android

™

XPanel: Crestron Control

for Computers

myCrestron: Dynamic DNS Service for Crestron Systems

Fusion EM

: Energy Management Software

Fusion RV

: Remote Asset Management Software

1 2 3 4 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron CP3 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Crestron CP3