Crestron CNRACKX Spezifikationen PDF herunterladen (Seite 7)

Crestron CNRACKX CNX Card Cage System

Operations Guide - DOC. 8133 CNX Card Cage System: CNRACKX •• 3

CRESNET

Cresnet 4-Wire and 6-Pin Connectors

On the CNXCPU, there are two network connectors: 4-wire and modular. The 4-wire

male connector (typical Crestron network port labeled 24 Y Z G) and 6-pin RJ-type

connector are used for expansion to Cresnet and SmarTouch peripherals. The total

maximum load rating depends on the expansion slot load. The ports are wired in

parallel.

NOTE: If using the 4-wire connector, review the latest revision of the Cresnet

Network Interconnect Drawing (Doc. 5411).

NOTE: If using the modular connector, review the latest revision of the Crestron

Network Modular Cable Requirements (Doc. 5682). Most 6-conductor phone cables

are wired in a crisscross fashion and are not compatible with Crestron equipment.

LAN/DPA

LAN/DPA Connector

LAN

DPA

This 8-pin RJ-type port on the CNXCPU is available when the optional CNXENET

Expansion Card is installed. Refer to the CNXENET Operations & Installation

Guide (latest revision of Doc. 8129) for further information.

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Keine Kommentare

Crestron CNRACKX Spezifikationen Seite 7