Crestron CNMSX-PRO Spezifikationen PDF herunterladen (Seite 11)

Crestron CNMSX Integrated Control System

COM CTS (A - F)

These LEDs illuminate to reflect the state of CTS (A - F). An illuminated LED means

that the CTS line is high. When CTS flow control is enabled, CTS indicates the serial

devices on the respective COM ports are ready to accept data from the unit.

IR - SERIAL (A - H)

These LEDs illuminate during activity on respective IR/SERIAL lines.

INPUT - OUTPUT (1 - 8)

These LEDs illuminate when the input voltage threshold for respective I/O ports are

exceeded or when the output is active.

RELAY (1 - 8)

These LEDs illuminate when respective relay is closed.

SLOT (1 - 3)

These LEDs illuminate when a CNX expansion card is inserted into respective slots.

CNMSX Buttons

Two buttons are provided on the front panel of the CNMSX. Refer to the description

of each below.

HW-R

Depression of this button initiates physical reset of the system.

SW-R

Depression of this button in combination with the HW-R button (as described in step

5 of "Troubleshooting Communications" on page 26) performs an overload/reset.

CNMSX LCD Display

The front panel of the CNMSX-PRO incorporates a reverse mode (yellow on black)

LCD display, shown below. The screen contains two lines with 40 characters per line;

it is used to extend features and gain access to the system including the SIMPL

program. To the right of the display are four menu selection buttons. These buttons

permit the user to navigate through the menus and also to control the brightness of the

display backlight. Below the display are six menu function buttons. These buttons

offer extended features of the CNMSX. For details, refer to "Programming the LCD

Display (available on CNMSX-PRO only)" on page 15.

Main Menu

(Default LCD Display)

LCD Display with Menu Selection and Menu Function Buttons

Operations Guide - DOC. 8118B Integrated Control System: CNMSX • 7

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Keine Kommentare

Crestron CNMSX-PRO Spezifikationen Seite 11