Crestron CHV-RTS Bedienungsanleitung PDF herunterladen (Seite 23)

Crestron CHV-TSTATEX infiNET EX™ Thermostat

Advanced Setup

Setup Mode

After the CHV-TSTATEX is installed, it is necessary to set it up for a particular

heating/cooling system. Please note that some of the setup parameters listed below

will not always be available. Refer to “Setup Mode Parameters/Functions”, which

starts on page 20 for details.

Place the CHV-TSTATEX in the Setup mode by doing the following:

1. Press and hold the FAN button.

2. While the FAN button is being held, press and hold the

and buttons

simultaneously.

3. Hold all three buttons for five seconds, after which the unit will enter Setup

mode.

Once in Setup mode, the display will indicate the currently selected setup

parameter/function. Press and release the MODE button quickly (must be released

within one second) to change to the next parameter/function in the list.

NOTE: Holding the MODE button for more than one second will reset the

currently selected parameter/function to its default value.

When setting parameters (such as when choosing between Fahrenheit or Celsius

display), pressing the

or button will increment or decrement the value. Value

change occurs when button is released.

When a function is selected (such as when starting an infiNET EX acquire), pressing

either

or will execute the function.

To exit from Setup mode, press the FAN button on the CHV-TSTATEX.

CHV-TSTATEX LCD Display (Setup Mode)

MODE

FAN

Skips to Next Setup

Parameter/Function

Indicates Current Setup

Parameter/Function

Indicates Current Value for

selected Setup Parameter

Exits Setup Mode

Adjust Current Setup

Parameter/Function Value

NOTE: When the CHV-TSTATEX is in Setup mode the large seven-segment

displays will show the current setup parameter/function. The small seven-segment

displays will show the current value for the selected setup parameter, if applicable, or

it will display “—” when a function is selected. All other display elements will be

hidden (refer to “LCD Display” which starts on page 26).

Operations & Installation Guide – DOC. 6989A infiNET EX™ Thermostat: CHV-TSTATEX • 19

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron CHV-RTS Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern