Crestron SW-SIMPL Bedienungsanleitung PDF herunterladen (Seite 33)

Sequences

It is possible to trigger multiple actions with only one button press.

Actions like this are used to start up or shut down a complete

room/installation: lights go to the right level, projector switches goes

on, screen comes down, switcher changes to the right

input/output,… all activated by only one button press.

Useful Symbols:

The Stepper symbol

drives its output signals high on the rising edge of <trig>

after the cor

responding <delay> expires. Each output then remains high for the

period specified by its cor

responding <len> parameter. Any subsequent changes

in <trig> have no effect until all outputs are low again.

The <busy> output goes high if any outputs are high, and low when all outputs are

low.

The Delay symbol

drives each output to the level of the <trig> input after the

corresponding <delay> expires. Note that all specified delays are independent of

one another; that is, there is no cumulative delay effect.

The optional <reset> immediately drives all outputs to the level of <trig> (with no

delay) for as long as <reset> is high.

By using an OR symbol

you can trigger a function with multiple driving sources

1 2 ... 28 29 30 31 32 33 34 35 36 37

Keine Kommentare

Crestron SW-SIMPL Bedienungsanleitung Seite 33