Crestron TPMC-4SM Installationsanleitung PDF herunterladen (Seite 6)

Isys i/O

Wall Mount Touchpanel Media Center Crestron TPMC-4SM

Panel Configuration

The TPMC-4SM touchpanel supports a direct connection to Crestron’s RoomView

software application.

To connect to RoomView, first enter the “Panel Setup Options” screen by touching

the screen while booting the touchpanel. Set the desired Ethernet configuration for

the panel using the “Ethernet Setup” screens and make note of the panel’s IP address.

NOTE: For details on the setup options for the TPMC-4SM, refer to the

“Configuring the Touchpanel” section of the latest version of the TPMC-4SM

Operations & Installation Guide (Doc. 6845).

On the “Panel Setup Options” screen, the button on the lower right allows selection

of either RoomView mode and User Project mode. The text on the button reflects

which mode is currently selected. Touching the button toggles between modes. This

must be set to RoomView mode in order to make the connection to RoomView. Refer

to the following illustration. Touch Save & Exit to confirm the settings.

“Panel Setup Options” Screen

After the panel has updated, the screen will display a “Waiting for RoomView

connection…” message, as shown in the following illustration.

“Waiting for RoomView connection…” Screen

2 • RoomView

Interface for TPMC-4SM Operations Guide – DOC. 6846A

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Keine Kommentare

Crestron TPMC-4SM Installationsanleitung Seite 6