Crestron SP-1 Bedienungsanleitung PDF herunterladen (Seite 9)

CRESTRON

Operations Guide - DOC. 5729 Slide Controller: SP-SC •• 5

SP-SC with CNMSX

The SP-SC can be used with a variety of Crestron systems, including the CNMSX.

When used with a CNMSX there are additional hardware requirements.

• A specially designed Serial Data Cable is required (p/n CNSP-112).

• An external power supply is required. Refer to "Specifications" on

page 2 for part number and input/output voltage specifications.

Connect the stereo plug of the CNSP-112 into the input port of the SP-SC. Connect

the Phoenix type connector to of the CNSP-112 to one of the Infrared – Serial output

ports on the CNMSX.

To program the CNMSX for the Slide Controller, refer to Crestron's SIMPL™

Windows® programming software (v 1.20.04 or later) and the latest version of the

Crestron Database (v 11.7.207).

NOTE: An external power supply must be used when using the SP-SC with the

CNMSX system. A CNSP-112 Serial Data Cable is also required.

Connect to CNMSX

Serial Data Cable

CNSP-112

To Slide Projector

Serial Data Cable

CNSP-112

External

Power Supply

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Crestron SP-1 Bedienungsanleitung Seite 9