Crestron iMedia IM-RX3 Installationsanleitung PDF herunterladen (Seite 5)

Crestron IM-WCC iMedia Wall Mount Computer Center

iMedia Wall Mount Computer

Center: IM-WCC

Introduction

Features and Functions

The IM-WCC is part of the Crestron iMedia line of network devices, room

control systems and signal routing solutions. The iMedia devices currently

include two receivers, IM-RX1 and IM-RX3, and three transmitters, IM-WCC,

IM-TCC, and IM-FTCC-B.

The iMedia Wall Mount Computer Center supports a single computer video and

audio connection in a standard double gang electrical box.

This device uses iMedia (IM) technology utilizing a single CresCAT-IM cable

to transmit computer RGB and stereo audio signals to a single projector or

plasma display. A typical XGA signal (1024 X 768 pixels at 60Hz) can be

transmitted up to 84 feet using iMedia, while higher resolutions up to

1600 x 1200 can be handled over shorter distances. Audio is transmitted

digitally at 20-bit, 48 kHz resolution. To facilitate connection of audio, video,

and computer equipment, all media, power and control signals are routed via a

single CresCAT-IM cable for an uncomplicated installation.

NOTE: The IM-WCC is not a Cresnet

device.

Functional Summary

• One computer RGB input connector

• One computer audio input connector

• One iMedia RJ-45 output connector (on the rear side)

• Power on/off SELECT button and indicator

• Rotary local volume control

The iMedia System

Using a new, proprietary signal routing solution, RGBHV, audio, power and

control signals are all transported using a single cable solution called iMedia.

Operations & Installation Guide – DOC. 6382 iMedia Wall Mount Computer Center: IM-WCC • 1

1 2 3 4 5 6 7 8 9 10 ... 15 16

Keine Kommentare

Crestron iMedia IM-RX3 Installationsanleitung Seite 5