Crestron DMPS-100 Spezifikationen PDF herunterladen (Seite 5)

DMPS-100-C DigitalMedia

™

Presentation System 100

crestron.com

800.237.2041

GEQ Gain: ±12.0 dB per band

GEQ Presets: 1 thru 10

PEQ Center Frequencies: 5 to 24000 Hz per band

PEQ Gain: -36.0 to +24.0 dB per band

PEQ Bandwidth: 0.02 to 3.50 octaves per band

PEQ Types: Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf,

Notch

PEQ Presets: 1 thru 5

Delay: 0.0 to 85.3 ms

Frequency Response: 20Hz to 20kHz ±0.5 dB (digital source);

20Hz to 20kHz ±0.5 dB (analog line source);

20Hz to 20kHz ±0.7 dB (microphone source)

S/N Ratio: >108 dB (digital source), 1 kHz, A-weighted;

>103 dB (analog line source), 1 kHz, A-weighted

THD+N: <0.002% (digital source), 20 Hz to 20 kHz;

<0.005% (analog line source), 20 Hz to 20 kHz;

<0.05% (microphone source), 20 Hz to 20 kHz

Stereo Separation: >108 dB (digital source);

>103 dB (analog source)

Channel Separation: >103 dB

HDMI & DM output:

Output Signal Types: HDMI, DM 8G+ and HDBaseT

Formats: Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24,

up to 8ch PCM

Mic 1 – 2: -80 to +10 dB Level adjustment range, plus Mute and Pan

[7]

Mics Master: -80 to +10 dB Level adjustment range, plus Mute

[7]

Left/Right (Source): -80 to +10 dB Level adjustment range, separately

adjustable for Left and Right, plus Mute

[7]

Master Volume: -80 to +10 dB Level adjustment range, plus Mute

[7]

Mixer Presets: 1 thru 5

Frequency Response: 20Hz to 20kHz ±0.5 dB (digital source);

20Hz to 20kHz ±0.5 dB (analog line source);

20Hz to 20kHz ±0.7 dB (microphone source)

S/N Ratio: >108 dB (digital source), 1kHz, A-weighted;

>103 dB (analog line source), 1kHz, A-weighted

THD+N: <0.002% (digital source), 20 Hz to 20 kHz;

<0.005% (analog line source), 20 Hz to 20 kHz;

<0.05% (microphone source), 20 Hz to 20 kHz

Stereo Separation: >108 dB (digital source);

>103 dB (analog source)

Channel Separation: >108 dB (digital source);

>103 dB (analog source)

Stereo Amplified Output (same signal as Program output):

Output Power, 4/8 Ω: 20 Watts RMS per channel at 8 Ohms,

4 Ohms tolerant

Output Power, 70/100V: 40 Watts RMS

Frequency Response: 20 Hz to 20 kHz ±1 dB @ 20 Watts into 8 Ohms;

100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts

S/N Ratio: 98 dB @ 20 Watts into 8 Ohms, 1 kHz, A-weighted;

96 dB @ 20 Watts in 4 Ohms, 1 kHz, A-weighted

THD+N: <0.1% (1 kHz), <0.7% (20 Hz to 20 kHz), @ 20 Watts into 4 or

8 Ohms

Stereo Separation: >65 dB @ 20 Watts, 1 kHz

Connectors – Audio/Video Inputs

HDMI INPUT 1 – 4: (4) 19-pin Type A HDMI female, digital video/

audio inputs;

Signal Types: HDMI, DVI, or DisplayPort Multimode

[2,6]

RGB INPUT 2 – 4: (3) DB15HD female, analog RGB/video inputs;

Signal Types: RGBHV, component, S-Video, or composite

[5]

;

Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;

Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;

Input Impedance: 75 Ohms nominal;

Sync Detection: RGBHV, RGBS, RGsB, YPbPr;

Sync Input Level: 3 to 5 Vp-p;

Sync Input Impedance: 2.2k Ohms;

Note: RGB Inputs 2-4 and HDMI Inputs 2-4 are mutually exclusive; HDMI

overrides RGB when using the auto-switching feature

Y, PB/Y, PR/C/COMP INPUT 4: (3) BNC female comprising (1) auto-sensing

multi-format analog video input;

Signal Types: Component, S-Video, or composite;

Formats: YPbPr, Y/C, NTSC or PAL;

Input Level: 1 Vp-p nominal;

Input Impedance: 75 Ohms nominal;

Note: Video Input 4, RGB Input 4, and HDMI Input 4 are mutually exclusive;

HDMI and RGB override Video when using the auto-switching feature

SPDIF INPUT 4: (1) RCA female, S/PDIF coaxial digital audio input;

Input Impedance: 75 Ohms;

Note: SPDIF Input 4 and HDMI Input 4 are mutually exclusive; HDMI over-

rides SPDIF when using the auto-switching feature

AUD IN 1 – 4: (4) 5-pin 3.5mm detachable terminal blocks;

Balanced/unbalanced stereo line-level analog audio inputs;

Input Impedance: 24k Ohms balanced/unbalanced;

Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;

Note: Analog Audio Inputs 1-4, SPDIF Input 4, and HDMI Inputs 1-4 are

mutually exclusive; HDMI and SPDIF override Analog Audio when using the

auto-switching feature

MC1/LN1 – MC2/LN2: (2) 5-pin 3.5mm detachable terminal blocks;

Comprises (2) balanced microphone/line audio inputs;

Balanced Mic Input Level: -60 to 0 dBV, 1 Vrms maximum;

Balanced Line Input Level: -31 to +11 dBV, 3.7 Vrms maximum;

Unbalanced Line Input Level: -37 to +5 dBV, 1.85 Vrms maximum;

Mic Input Impedance: 3.9k Ohms balanced;

Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced;

Phantom Power: 48 Volts DC, software enabled/disabled per channel

Connectors – Audio/Video Outputs

SPEAKER OUTPUT 4Ω/8Ω L – R: (2) 2-pin 7.62mm 15A detachable

terminal blocks;

4-8 Ohm stereo speaker-level audio output;

Wire Size: Terminals accept up to 14 AWG;

Output Power: 20W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron DMPS-100 Spezifikationen Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Crestron DMPS-100