Crestron DTT-17 Spezifikationen PDF herunterladen (Seite 11)

DualTouch™ Technology Touchpanel Crestron DTT-17

Ports

The ports are located on the right rear side of the DTT-17 under a slide-off protective

cover. The serial connector is not used in this application.

USB 2.0

One Universal Serial Bus (USB) type “B” female connector is provided for data

transfer, and may be connected to any of the four USB ports on the UPX-2, although

the port shown on page 10 is the preferred port.

USB Type B Connector Pinout

PIN DESCRIPTION

1 +5 VDC

2 Data -

3 Data +

4 Ground

Power Adaptor Connector

One DC IN connector provides connection for the power supply, 45 Watts

(3.75 Amps @ 12 Volts DC). Power supply included.

DVI/I RGB

The DTT-17 has one 29-pin female DVI/I RGB (DB15HD) connector for video

input.

The DVI/I (integrated) configuration is designed for both analog and digital signals.

Pins C1 through C5 are for the analog signals from the UPX-2. A DVI/I RGB cable

(included) is required to connect with the UPX-2.

DVI/I RGB Cable (DB15HD) Connections

VGA (RGB) DVI/I CABLE FUNCTION

SHIELD SHIELD GROUND

PIN R6, G7, B8 C5 ANALOG GROUND

PIN 13 C4 HORIZONTAL SYNC

PIN 3 C3 ANALOG BLUE

PIN 2 C2 ANALOG GREEN

PIN 1 C1 ANALOG RED

PIN 5,10 PIN 15 GROUND (+5V & HV SYNC)

PIN 9 PIN 14, 16 POWER +5V/HDT PLUG DETECT

PIN 14 PIN 8 VERTICAL SYNC

PIN 12 PIN 7 DDC DATA

PIN 15 PIN 6 DDC CLOCK

Operations Guide – DOC. 6343 DualTouch™ Technology Touchpanel: DTT-17 y

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Crestron DTT-17 Spezifikationen Seite 11