Crestron C2N-DAP8 Spezifikationen PDF herunterladen (Seite 39)

Crestron C2N-DAP8 Digital Audio Processor

Operations Guide – DOC. 8186 Digital Audio Processor: C2N-DAP8 • 35

SPEAKER CONFIG Window

Use this screen to specify the speaker arrangement of your system and to set the

crossover frequency for the subwoofer.

Click on the appropriate buttons to identify the existing speaker arrangement. Note

that the front and the surround speakers are treated as pairs. Select the appropriate

one of the X-OVER buttons to specify the crossover frequency for the subwoofer (if

present). The distinction between large and small speakers here is their ability to

provide effective sound in the low frequency range (120 Hz and below), not their

physical size. Speakers designated as large will receive low frequency signals. Low

frequency signals appearing in channels with speakers designated as small will be

filtered out and routed to the subwoofer. Check the frequency range rating of all

speakers to determine their proper setting.

Audio Configuration

Select the AUDIO CONFIG button. The screen displays the AUDIO CONFIG

window. Use this screen to set up the volume trims, the delays, and the noise

generator settings. These settings are used together during room calibration.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Keine Kommentare

Crestron C2N-DAP8 Spezifikationen Seite 39