Crestron CP2 Bedienungsanleitung PDF herunterladen (Seite 9)

Crestron CAGE2 3-Card Expansion Cage for AV2

NOTE: During the next step, the four SEM (attached washer) screws must be

retained to install the CAGE2. However, the blank plate will not be reused.

4. Refer to the diagram below. Use a #2 Phillips screwdriver to remove

four rear-mounting SEM screws that secure the AV2 blank plate and

remove the plate.

CAGE2 Installation (3 of 11) - Remove Rear-Mounting SEM Screws & AV2 Blank Plate

NOTE: During the next step, the two screws must be retained to install the CAGE2.

However, the two nuts will not be reused.

5. Refer to the diagram below. From inside the AV2, use a 1/4-in hex-

driver or wrench to hold the nut of one of the bottom-mounting screws.

From the underside of the AV2, use a #2 Phillips screwdriver to

remove the mounting screw. Repeat for second nut and screw.

CAGE2 Installation (4 of 11) - Remove Bottom-Mounting Screws & Nuts

Installation Guide - DOC. 5964 3-Card Expansion Cage for AV2: CAGE2 • 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Crestron CP2 Bedienungsanleitung Seite 9