Crestron C2-AUDIO-6PAK Spezifikationen PDF herunterladen (Seite 22)

Six-Zone Audio Package Crestron C2-AUDIO-6PAK

System Operation

This section describes how to use the function keypad to operate a Crestron audio

distribution system.

NOTE: These keypads are standard Crestron network devices and as such do not

have any functionality built-in. Instead, the program loaded into the CP2 governs

their operation. If you choose to use these keypads without using the devices called

out in the C2-AUDIO-6PAK, the programmer must determine how they operate.

The keypad provides on/off functionality, volume and mute control, source selection

and control, and priority override.

On/Off Button

ON/OFF

The On/Off button performs five distinct actions, based on when and how it is

pressed.

• Room On: Press/release while room is off.

• Room Off: Press/release while room is on.

• Sleep Mode On: Press/hold for about two seconds until LEDs flash,

then release. The button blinks slowly to indicate that sleep mode is

active. Room turns off in one hour.

• Sleep Mode Off: Press/release while in sleep mode.

• All Rooms Off: Press/hold for about four seconds until room shuts off.

Volume and Mute Buttons

MUTE

VOL

• Mute Button: Press to toggle volume mute on and off. LED blinks

when volume is muted. Mute is cleared whenever volume is adjusted

with the Volume Up/Down buttons or whenever a Source Selection

button is selected.

• Volume Up/Down Buttons: Control room volume level. LED of

selected source blinks when volume level is adjusted.

18 • Six-Zone Audio Package: C2-AUDIO-6PAK Reference Guide – DOC. 8188B

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

Crestron C2-AUDIO-6PAK Spezifikationen Seite 22