Crestron TPMC-CH-IMC Bedienungsanleitung PDF herunterladen (Seite 2)

Crestron Isys i/O

™

TPMC-15-CH 15" Touchpanel Media Center

Ethernet

10BaseT/100BaseTX, auto-negotiating, full/half duplex TCP/IP, UDP/IP, DHCP, SSL,

IEEE 802.3U compliant

Wireless

Wireless Ethernet capable using third-party 802.11 PC card*

Video

Scalers: (2) one per input, each feeding one onscreen video window or full screen image;

line doubling of video sources and scaling of RGB sources, automatic detection of input

format, motion adaptive de-interlacing, and reverse 3:2/2:2 pulldown

Digital Sampling: 24 bits per pixel, 8 bits per color

Resolution: 24-bit video/graphics

Output Color Depth: 24 bits per pixel, 8 bits per color

Streaming/File Formats: ASF, ASX, AVI, MPEG, WMV, WMX, WVX (via WMP)

Audio

Hardware Features: Built-in microphone and biamplified speakers, stereo headphone

output, internal volume control and audio mixer

Streaming/File Formats: MP3, WAV, WAX, WMA (via WMP)

Audio Feedback (WAV): 8 & 16 bit PCM, mono & stereo, 8 – 44 kHz sampling rates

Amplification: Biamplified, mono, 5 Watts for high-frequency, 5 Watts for low-frequency

Buttons

: (4) Backlit “softkey” buttons, programmable

: (1) Backlit hard reset button, reboots the touchpanel system

Connectors

CH VIDEO IN 1 – 2: (2) 8-wire RJ45 female, CAT5 balanced video input ports, each

dynamically configurable under system control as:

(1) Composite (NTSC/PAL), or

(1) S-Video (Y/C), or

(1) Component (YP

)

Formats: SDTV 480i (NTSC) & 576i (PAL), EDTV 480p & 576p, HDTV 720p & 1080i;

Input Impedance: 100 ohms balanced

Connect to any Crestron CAT5 balanced video source(s), or TPMC-CH-IMC interface

module (included) via 15 foot "triamese" cable provided;

Maximum CAT5 Distance: 500 feet for component/HDTV, 750 feet for composite/S-Video

CH AUDIO I/O: (1) 8-wire RJ45 female, bidirectional CAT5 balanced audio port:

Receives (1) balanced stereo audio signal, and

Transmits (1) balanced stereo audio signal from internal microphone

Maximum Input Level: 4 V

RMS

Maximum Output Level: 2 V

RMS

Input/Output Impedance: 600 ohms

Connects to any other Crestron CAT5 balanced audio port, or TPMC-CH-IMC interface

module (included) via 15 foot "triamese" cable provided;

Maximum CAT5 Distance: 1000 feet

HEADPHONES: (1) 3.5 mm TRS mini phone jack

Output Power: 105 mW per channel

Minimum Impedance: 8 ohms

USB: (2) USB Type A female, USB 1.1 ports for mouse, keyboard, and storage devices*

RS-232: (1) 6-pin RJ11 female, computer console port

Bidirectional RS-232 up to 115.2k baud

Hardware and software handshaking support

PC CARD A – B: (2) Type II PCMCIA Card slots for memory expansion, project upload,

and wireless NIC*

ETHERNET: (1) 8-wire RJ45 with 2 LED indicators, 10BaseT/100BaseTX Ethernet port

Green LED indicates network speed, Yellow LED indicates Ethernet activity

NET: (1) 4-pin 5mm detachable terminal block

Cresnet Slave Port (data only; 24V terminal not used)

Connects to Cresnet control network, or TPMC-CH-IMC interface module (included) via

15 foot "triamese" cable provided

PWR: (1) 4-pin DIN female, DC power input (External power supply included)

GND: (1) 6-32 screw, chassis ground lug

Power Requirements

8.4 Amp @ 12 Volts DC – External power supply included

Cresnet Power Usage: 0 Watt @ 24 Volts DC

Environmental

Temperature: 50° to 113°F (10° to 45°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Construction: High impact black/silver injection-molded case with integral rear cover and

cable strain relief

Screen Tilt: Adjustable 45 to 90 degrees

Dimensions

Height: 14.17 in (35.99 cm)

Width: 14.94 in (37.95 cm)

Depth: 13.74 in (34.90 cm)

Weight

15.8 lbs (7.1 kg)

SPECIFICATIONS for TPMC-CH-IMC Interface Module (Included with TPMC-15-CH):

Connectors

NET: (1) 4-pin 3.5mm detachable terminal block, Cresnet slave port

Connects to Cresnet control network

VIDEO COMP/Y/Y, C/P

, P

: (3) BNC female

Provides (1) Composite, S-Video, or component video input

Input Impedance: 75 ohms

Input Level: 1 V

P-P

nominal, 1.5 V

P-P

maximum

Maximum DC Offset: 1.5 Volts

AUDIO IN: (1) 5-pin 3.5mm detachable terminal block

Balanced/unbalanced stereo line-level input

Input Impedance: 20k ohms balanced, 10k ohms unbalanced

Maximum Input Level: 4 V

RMS

balanced, 2 V

RMS

unbalanced

AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block

Balanced stereo line-level output (unbuffered pass-thru from AUDIO TO PANEL)

AUDIO TO PANEL: (1) 8-pin RJ45 female, bidirectional CAT5 balanced stereo audio port

Output Impedance: 100 ohms balanced

Maximum Output Level: 2 V

RMS

Input Impedance: Infinite (unbuffered pass-thru to AUDIO OUT)

VIDEO TO PANEL: (1) 8-pin RJ45 female, CAT5 balanced video output port

Output Impedance: 100 ohms balanced

NET TO PANEL: (1) 4-pin 3.5mm detachable terminal block, pass-thru from NET port

LED Indicators

PWR: (green) Indicates 24 Volts DC power supplied from Cresnet control network

Power Requirements

Cresnet Power Usage: 2 Watt (0.08 Amps @ 24 Volts DC)

Environmental

Temperature: 41° to 122°F (5° to 50°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Black metal, surface mount box with (2) integral mounting flanges

Dimensions

Height: 1.29 in (3.28 cm)

Width: 7.30 in (18.54 cm)

Depth: 3.95 in (10.03 cm)

Weight

9.7 oz (0.28 kg)

See manual or contact Crestron for a current list of compatible devices and embedded

applications. To ensure reliable performance, new device drivers and applications are

available only from Crestron through firmware updates.

1 2 3 4

Crestron Isys i/O 1
TPMC-15-CH 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron TPMC-CH-IMC Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Crestron TPMC-CH-IMC