Crestron PRO2 Bedienungsanleitung PDF herunterladen (Seite 2)

Crestron PRO2 Professional Dual Bus Control System

Connectors and Expansion Slots

Y-Bus: 40 Mb/s parallel communications

Backplane for integrated control ports and Y-Bus expansion slots

COM A - F: (6) DB9 male, bidirectional RS-232/422/485 ports

Up to 115.2k baud, hardware and software handshaking support

Ports C-F support C2N-NPA8 Network Poll Accelerator

INFRARED-SERIAL OUTPUT A - H: (8) 2-pin 3.5mm detachable terminal blocks

IR/Serial output ports

IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

Individual signal generator per port, allowing simultaneous firing of all ports

I/O Versiports 1 - 8: (1) 9-pin 3.5mm detachable terminal block comprising (8) digital

input/output or analog input ports (referenced to GND);

Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold

1.24 Volts DC;

Digital Output: 250 mA sync from maximum 24 Volts DC, catch diodes for use with

“real world” loads;

Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input

impedance 20k ohms;

Programmable 5 Volts, 2k ohms pull-up resistor per pin

RELAY OUTPUT 1 - 8: (2) 8-pin 3.5mm detachable terminal blocks comprising (8)

normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC, MOV arc suppression across contacts

Expansion Slots: (3) Y-Bus expansion slots, accept all Y-Bus control cards

Z-Bus: 300 Mb/s parallel communications, backplane for Z-Bus expansion slots

Expansion Slot: (1) Z-Bus expansion slot, accepts all Z-Bus control cards

COMPUTER: (2) DB9 female, front and rear panel RS-232 computer console ports

NET: (1) 4-pin 5mm detachable terminal block, Cresnet port, Master/Slave selectable

Expandable via C2N-NPA8 Network Poll Accelerator

100-250V ~ 2.3A: (1) IEC Socket, mates with removable power cord (included)

Ground: (1) 6-32 screw, chassis ground lug

Buttons

HW-R: Hardware reset (reboots the control system)

SW-R: Software reset (restarts the SIMPL program)

FUNCTIONS: (6) Up to 6 dynamically assigned functions based upon current menu

MENU: (1) Returns the LCD display to the MAIN menu

: (2) Scroll up or down through any list displayed in the LCD display

BKLT: (1) Toggles through 4 levels of backlight intensity for the LCD display

Refer to the Operations Guide for additional menu functions

Display

(2) lines, (40) characters per line; reverse mode (yellow and black) LCD back light

Displays system information, configuration menus, and custom user functions

LED Indicators

PWR: (1 green) Indicates AC power supplied to unit

NET: (1 yellow) Indicates Cresnet bus activity

MSG: (1 red) Indicates control system has generated an error message

LNK A: (1 red) Indicates a valid connection on LAN port A

ACT A: (1 red) Indicates activity on LAN port A

LNK B: (1 red) Indicates a valid connection on LAN port B

ACT B: (1 red) Indicates activity on LAN port B

COM A – F (TXD, RXD, RTS, CTS): (24 red) Indicate activity on each respective COM

port

IR-SERIAL A – H: (8 red) Indicate activity on each respective IR/Serial port

INPUT-OUTPUT 1 – 8: (8 red) Indicate activity on each respective I/O Versiport

RELAY 1 – 8: (8 red) Indicate contact closure at each respective relay port

SLOT 1 – 3: (3 red) Illuminates to indicate presence of a card in the respective expansion

slot; extinguishes momentarily to indicate activity

Power Requirements

Internal Universal Power Supply: 2.3 Amps, 100-250 Volts AC, 50/60 Hz

Available Cresnet Power: 50 Watts (shared with control card expansion slots)

Environmental

Temperature: 41° to 113°F (5° to 45°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Black metal, 2U 19” rack-mountable (rack ears included)

Dimensions

Height: 3.47 in (8.81 cm)

Width: 19.00 in (48.26 cm) with ears; 17.03 in (43.24 cm) without ears

Depth: 9.69 in (24.61 cm)

Weight

8.0 lb (3.62 kg) – with line cord

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

Tel: 800.237.2041 / 201.767.3400

Fax: 201.767.1903

www.crestron.com

Specifications subject to change without notice. Doc.5967A 04/06

All brand names, product names and trademarks are the property of their respective owners.

AVAILABLE ACCESSORIES

C2COM-2

2 COM Port Y-Bus Control Card

C2COM-3

3 COM Port Y-Bus Control Card

C2IR-8

8 IR/Serial Output Y-Bus Control Card

CNXIO-16

16 I/O Versiport Y-Bus Control Card

CNXAO-8

8 Analog Output Y-Bus Control Card

CNXRY-8

8 Relay Y-Bus Control Card

CNXRY-16

16 Relay Y-Bus Control Card

CNXMIDI

MIDI Y-Bus Control Card

C2VEQ-4

4 Channel Volume/EQ Y-Bus Control Card

C2ENET-1

Single Port Ethernet Z-Bus Control Card

C2ENET-2

Dual Port Ethernet Z-Bus Control Card

C2N-HBLOCK

Cresnet Network Distribution Block

C2N-NPA8

Cresnet Network Poll Accelerator

C2N-SPWS300

300 Watt Cresnet Power Supply

CNSP-XX

Custom Serial Interface Cable

IRP2

IR Probe

Rear Panel

3 Y-Bus Expansion Slots

1 Z-Bus Expansion Slot

Memory Expansion Slot

(behind cover plate)

1 2

Crestron PRO2 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron PRO2 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Crestron PRO2