Crestron C2N-NPA8 Bedienungsanleitung PDF herunterladen

C2N-SPWS300C2N-SPWS300C2N-SPWS300C2N-SPWS300

300 Watt Cresnet Power Supply

Crestron control systems can put a friendly face on any complete

integrated AV or automation solution. To support the myriad

touchpanels, keypads, and other peripherals that make up a control

system, the C2N-SPWS300 provides a convenient and compact centralized

power and termination solution.

Intelligent Power DistributionIntelligent Power DistributionIntelligent Power DistributionIntelligent Power Distribution

The C2N-SPWS300 is a 300 Watt regulated power supply designed for

powering a large network of Cresnet devices. Power is supplied on

eight individually managed outputs. Each output is rated for up to 75

Watts, with a total system rating of 300 Watts. Electronic circuit

breaker protection is provided on every output, which can be

individually monitored and reset from the control system. The voltage

level at each output can even be monitored along with ambient

temperature and fault status for the complete power supply system.

Sequential SwitchingSequential SwitchingSequential SwitchingSequential Switching

To minimize current inrush upon startup, the C2N-SPWS300 implements

sequential switching of its eight outputs. The startup process may be

activated automatically when AC power is applied, or when 24 Volts DC

is sensed coming from the control system or another power supply.

Cresnet DistributionCresnet DistributionCresnet DistributionCresnet Distribution

Connected to the Master port of any 2-Series Crestron control system,

the C2N-SPWS300 provides a total Cresnet distribution solution.

Carrying both data and power, the 16 Cresnet ports afford great

flexibility for the termination of numerous Cresnet devices, with easy

expansion using C2N-HBLOCK termination blocks. It is also ideally

designed to enhance the built-in Cresnet distribution capabilities of

the PAC2 Professional Automation Control System.

Versatile Mounting OptionsVersatile Mounting OptionsVersatile Mounting OptionsVersatile Mounting Options

The C2N-SPWS300 can be installed in a Crestron CAEN Automation

Enclosure using the optional CAEN-MK (sold separately), or rack

mounted using the optional C2N-RMAK (sold separately). Alternately,

the C2N-SPWS300 may simply be placed on a shelf or mounted to any

vertical surface using its built-in mounting flanges.

> 300 Watt regulated power supply

> 8 independently managed outputs

> 16 Cresnet distribution ports

> Cresnet monitoring and control

> Expands the Cresnet power and distribution capabilities of

any 2-Series control system

SPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONS

Load RatingsLoad RatingsLoad RatingsLoad Ratings

Per Channel: Per Channel: Per Channel: Per Channel: 75 Watts (3.125 Amps) @ 24 Volts DC regulated

System Total: System Total: System Total: System Total: 300 Watts (12.5 Amps) @ 24 Volts DC regulated

Ripple / Noise: Ripple / Noise: Ripple / Noise: Ripple / Noise: <150 mV

Load Protection: Load Protection: Load Protection: Load Protection: Electronic circuit breaker per channel, each rated at 75 watts

nominal / 100 watts maximum; 4 Amp, 125V internal fuse; all channels shut off

in case of total system overload

Sequential Startup: Sequential Startup: Sequential Startup: Sequential Startup: Outputs activate sequentially when power supply system is

enabled (see PWR ON, PWR OFF/SLAVE control)

Power RequirementsPower RequirementsPower RequirementsPower Requirements

4 Amps, 100-240 Volts AC, 50/60 Hz

ConnectionsConnectionsConnectionsConnections

1 - 8: 1 - 8: 1 - 8: 1 - 8: (16) 4-pin 5mm detachable terminal blocks comprising (2) paralleled

Cresnet ports per each of (8) output channels;

24 Volt DC power outputs with Cresnet data pass-thru from NET port

NET: NET: NET: NET: (1) 4-pin 5mm detachable terminal block;

Ordinarily connects to the Master Cresnet port of a control system;

Cresnet data ‘Y’ and ‘Z’ terminals pass through to ports 1 – 8;

Applying 24 Volts DC to the ‘24’ and ‘G’ terminals enables the power supply

system when in “SLAVE” mode

AC Line : AC Line : AC Line : AC Line : (1) attached input power cable (~1 ft long) with inline IEC320

socket;

Connects to grounded AC power source using 3-prong power cable or pigtail

cable, both provided

ControlsControlsControlsControls

PWR ON, PWR OFF/SLAVE: PWR ON, PWR OFF/SLAVE: PWR ON, PWR OFF/SLAVE: PWR ON, PWR OFF/SLAVE: (1) rocker switch; enables/disables the power

supply system if no external DC voltage is applied to the NET port, or selects

“SLAVE” mode to allow enabling the power supply system remotely by

applying an external 24V DC signal to the NET port

RESET 1 - 8: RESET 1 - 8: RESET 1 - 8: RESET 1 - 8: (8) miniature pushbuttons; each resets its respective output

channel, or momentarily disables the channel while held

SYSTEM RESET: SYSTEM RESET: SYSTEM RESET: SYSTEM RESET: (1) miniature pushbutton; resets all output channels

sequentially, or momentarily disables all channels while held

SETUP: SETUP: SETUP: SETUP: (1) miniature pushbutton; used for touch-settable ID (TSID)

LED IndicatorsLED IndicatorsLED IndicatorsLED Indicators

PWR 1 - 8: PWR 1 - 8: PWR 1 - 8: PWR 1 - 8: (green) Indicate 24V DC power present at each channel output

OVRLD 1 - 8: OVRLD 1 - 8: OVRLD 1 - 8: OVRLD 1 - 8: (red) Indicate a load in excess of 75 watts on a given channel,

channel output disabled

SYSTEM OVRLD: SYSTEM OVRLD: SYSTEM OVRLD: SYSTEM OVRLD: (red) Indicates a total load in excess of 300 watts on the

power supply system, all channels disabled

PWR: PWR: PWR: PWR: (green) Indicates power supply system is enabled

www.crestron.com 800.237.2041www.crestron.com 800.237.2041www.crestron.com 800.237.2041www.crestron.com 800.237.2041

1 2 3

Inhaltsverzeichnis

Seite 1 - 300 Watt Cresnet Power Supply

C2N-SPWS300C2N-SPWS300C2N-SPWS300C2N-SPWS300300 Watt Cresnet Power SupplyCrestron control systems can put a friendly face on any completeintegrated AV

Seite 2 - WeightWeightWeightWeight

C2N-SPWS300C2N-SPWS300C2N-SPWS300C2N-SPWS300 300 Watt Cresnet Power Supply 300 Watt Cresnet Power Supply 300 Watt Cresnet Power Supply 300 Watt Cresne

Seite 3

C2N-SPWS300C2N-SPWS300C2N-SPWS300C2N-SPWS300 300 Watt Cresnet Power SupplyCrestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647Tel: 800.23

Weitere Dokumente für Vernetzung Crestron C2N-NPA8

Um das Dokument anzuzeigen Crestron C2N-NPA8 Spezifikationen

Crestron C2N-NPA8 Spezifikationen (40 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Crestron C2N-NPA8 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Vernetzung Crestron C2N-NPA8 herunter. Spec Sheet: C2N-SPWS300 - 300 Watt Cresnet Power Supply Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Vernetzung Crestron C2N-NPA8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Crestron C2N-NPA8